Φ24mm DC Brushless Vibration Motor Parameters
Long lifetime small diameter brushless vibration motor, super big amplitude, low noise. Can work continuously for 30,000 hours. Speed
| Motor Model | NFP-BL2430-SF |
|---|---|
| Motor Diameter | Φ24mm |
| Motor Total Length | 43mm |
| Rated Voltage | 12V / 24V DC |
| Rated Speed | 3,000rpm / 6,000rpm |
| Weight | About 65g |
| Rotation | CW / CCW |
Note: all reduced no-load speeds have a tolerance of ±15%.
Features:
- ☞ Fan-shaped vibration head
Large swing head eccentric shaft: All made of high-quality metal materials, with the characteristics of corrosion resistance, not easy to rust, stable transmission ratio, not easy to heat and low noise. - ☞ Pure copper coil
Six-wire winding 100% pure copper wire: Pure copper wire has high resistance accuracy, stable and reliable, faster speed, stronger torque with reducer, small temperature coefficient, and can withstand high temperature. - ☞ High-quality magnetic tile
Good conductivity and long life, high work efficiency and low dynamic loss. Material: sintered NdFeB magnet three-layer treatment, good anti-rust ability, working temperature 80°-200°. - ☞ Built-in brushless drive
Plug and play, stable output: stable and reliable performance, with brushless coil protection board inside, can be forward and reverse rotation, and also with brake, speed regulation and speed measurement wire output.
High-frequency Vibration BLDC Motor Outline Drawing
Long Lifetime Brushless DC Motor Wiring Instruction
Forward / Reverse Rotation Control (without speed regulation):
2430 Five-wire Motor Wiring Instructions:
- Red Wire: motor power supply positive pole (+) [DC power supply is selected according to motor specifications]
- Black Wire: motor power supply negative pole (-)
- Yellow Wire: FG signal output (for external equipment to detect motor speed, the motor outputs 9 square wave pulses for one circle)
- White Wire: duty cycle speed regulation wire: pulse width speed regulation 15-25KHz [when not regulating speed, connect the white wire together with black wire to power supply negative pole (-), and the motor runs at full speed]
- Orange Wire: forward / reverse rotation [connect the orange wire together with black wire to negative pole (-), the rotation will be reversed], overcurrent protection is 0.8A, automatic protection starts when the instantaneous current exceeds 0.8A, stall protection, the motor will start again after being re-powered.
◆Note: The positive pole (+) and negative poles (-) of the motor cannot be connected in reverse!
The yellow wire is the speed signal wire and cannot be connected to the speed regulator!
Application:
Beauty Instruments, Massagers, Vibrators
Keywords:
brushless vibration motor, dc brushless vibration motor, brushless motor anti vibration, brushless vibration, motor brushless vibration
