Single Fanshaped Head Vibration BLDC Motor Parameters
Long lifetime small diameter brushless vibration motor, super big amplitude. High-frequency, low noise. Can work continuously for 15,000 hours. Speed
| Motor Model | NFP-BL2418-SF |
|---|---|
| Motor Diameter | Φ24mm |
| Motor Total Length | 30mm |
| Rated Voltage | 12V / 24V DC |
| Rated Speed | 4,000rpm / 8,000rpm |
| Weight | About 37g |
| Rotation | CW / CCW |
Note: all reduced no-load speeds have a tolerance of ±15%. Features:
- ☞ Fan-shaped vibration head
Large swing head eccentric shaft: All made of high-quality metal materials, with the characteristics of corrosion resistance, not easy to rust, stable transmission ratio, not easy to heat and low noise. - ☞ Pure copper coil
Six-wire winding 100% pure copper wire: Pure copper wire has high resistance accuracy, stable and reliable, faster speed, stronger torque with reducer, small temperature coefficient, and can withstand high temperature. - ☞ High-quality magnetic tile
Good conductivity and long life, high work efficiency and low dynamic loss. Material: sintered NdFeB magnet three-layer treatment, good anti-rust ability, working temperature 80°-200°. - ☞ Built-in brushless drive
Plug and play, stable output: stable and reliable performance, with brushless coil protection board inside, can be forward and reverse rotation, and also with brake, speed regulation and speed measurement wire output.
Φ24mm DC Brushless Vibration Motors Outline Drawing
Low Noise Miniature Brushless DC Motor Wiring Instruction
Forward / Reverse Rotation Control (without speed regulation):
2418 Five-wire Motor Wiring Instructions:
- Red Wire: motor power supply positive pole (+) [DC power supply is selected according to motor specifications]
- Black Wire: motor power supply negative pole (-)
- Yellow Wire: FG signal output (for external equipment to detect motor speed, the motor outputs 18 square wave pulses for one circle)
- White Wire: duty cycle speed regulation wire: pulse width speed regulation 15-25KHz [when not regulating speed, connect the white wire together with black wire to power supply negative pole (-), and the motor runs at full speed]
- Orange Wire: forward / reverse rotation [connect the orange wire together with black wire to negative pole (-), the rotation will be reversed], overcurrent protection is 0.8A, automatic protection starts when the instantaneous current exceeds 0.8A, stall protection, the motor will start again after being re-powered.
◆Note: The positive pole (+) and negative poles (-) of the motor cannot be connected in reverse!
The yellow wire is the speed signal wire and cannot be connected to the speed regulator!
Application: Beauty Instruments, Massagers, Vibrators
Keywords:
brushless vibration motor, dc brushless vibration motor, brushless motor anti vibration, brushless vibration, motor brushless vibration
