36mm Brushless ERM Vibration Motor Datasheet
Experience unparalleled performance with our 36mm Brushless Vibration Motor, model NFP-BLV3650-FS. This advanced vibration motor is designed for high-demand applications, offering exceptional durability, precise speed control, and powerful vibration force. Perfect for industrial, medical, and consumer electronics applications, it ensures your projects achieve the highest standards of efficiency and reliability.
| Motor Model | NFP-BL3650-FS |
|---|---|
| Motor Diameter | 36mm |
| Motor Length | 50mm (not include eccentric vibrating head) |
| Total Length | 77mm |
| Eccentric Mass Diameter | 33.5mm |
| Rated Voltage | 12V / 24V DC |
| Rated Speed | 4,000rpm / 8,000rpm |
| Rotation | CW / CCW |
| Weight | 218g |
| Lifetime: | 30,000 hours continuously work |
High-quality magnetic tiles, good conductivity and long life, strong working efficiency and small dynamic loss, material: three-layer treatment of sintered NdFeB magnets, good anti-rust ability, working temperature 80°-200°.
Note: all reduced no-load speeds have a tolerance of ±15%. Features:
- ☞ Fan-shaped vibration head
Large swing head eccentric shaft: All made of high-quality metal materials, with the characteristics of corrosion resistance, not easy to rust, stable transmission ratio, not easy to heat and low noise. - ☞ Pure copper coil
Six-wire winding 100% pure copper wire: Pure copper wire has high resistance accuracy, stable and reliable, faster speed, stronger torque with reducer, small temperature coefficient, and can withstand high temperature. - ☞ High-quality magnetic tile
Good conductivity and long life, high work efficiency and low dynamic loss. Material: sintered NdFeB magnet three-layer treatment, good anti-rust ability, working temperature 80°-200°. - ☞ Built-in brushless drive
Plug and play, stable output: stable and reliable performance, with brushless coil protection board inside, can be forward and reverse rotation, and also with brake, speed regulation and speed measurement wire output.
Brushless DC Vibrating Motor Outline Drawing
Six-wire coiled 100% pure copper wire. Pure copper wire has high resistance accuracy, stability and reliability, faster rotation speed, stronger torque when combined with a reduction gearbox, small temperature coefficient, and can withstand high temperatures.
Built-in brushless driver, plug-and-play stable output, stable and reliable performance, built-in brushless coil protection plate, can rotate forward and reverse, and also has brake, speed regulation and speed measurement line output.
Wiring Introduction
3650 (Five-wire Motor Connection Explanation)
Red Wire: Motor power positive (+) “Select DC power according to motor specifications”
Black Wire: Motor power negative (-)
Yellow Wire: FG signal output (for external equipment to detect motor speed, motor rotates one circle outputs 6 square pulses)
White Wire: Motor forward rotation control: terminal not connected when motor CCW, terminal connected to low level (≤0.6V) when motor CW
Blue Wire: Speed control: input analog voltage (0~5V), speed and voltage are positively correlated
3650 (Six-wire Motor Connection Explanation)
Red Wire: Motor power positive (+) “Select DC power according to motor specifications”
Black Wire: Motor power negative (-)
Yellow Wire: FG signal output (for external equipment to detect motor speed, motor rotates one circle outputs 6 square pulses)
White Wire: Motor forward rotation control: terminal not connected when motor CCW, terminal connected to low level (≤0.6V) when motor CW
Blue Wire: Speed control: input analog voltage (0~5V), speed and voltage are positively correlated
Green Wire: Brake: terminal left empty for motor operation, connect to negative pole (0V) for brake
BLDC3650 (Internal Driver Version) Brushless Motor Sequence Explanation
| No. | Signal Terminal | I/O | Specification | Notes |
| 1 | VCC | IN | 12/24V | Red wire/motor power positive + |
| 2 | GND | IN | Ground | Black wire/motor power negative – |
| 3 | CW/CCW Forward/Reverse | IN | VIH Min2.5V, VIL Max0.6V | White wire, forward rotation control |
| 4 | FG Speed Feedback | OUT | VOL 0.5V Max, VOH Max3mA | Yellow wire, open collector output (NPN) no connection to similar FG output for motor speed |
| 5 | PWM | IN | VIH Min2.5V, VIL Max0.6V | Blue wire, stop/operate motor |
| 6 | BRAKE | IN | VIH Min2.5V, VIL Max0.6V | Green wire, brake control |
Notes:
1.Positive and negative poles cannot be reversed, otherwise, the motor will be damaged.
2.For forward and reverse rotation, please make sure the motor stops completely before switching, otherwise, it may cause damage to the driver and the motor!
3.Due to structural problems, the motor output/rotation direction is not completely fixed (part of the no-load condition may have reverse rotation input/output).
4.Using a resistive load to adjust the speed may cause the speed to be unstable, it is recommended to use an appropriate way to adjust the speed (reduce or increase the load size).
Five-wire Forward / Reverse Rotation Control (without speed regulation):
Six-wire Forward / Reverse Rotation Control (without speed regulation):
3650 Five-wire Motor Wiring Instructions:
-
-
- Red Wire: motor power supply positive pole (+) [DC power supply is selected according to motor specifications]
- Black Wire: motor power supply negative pole (-)
- Yellow Wire: FG signal output (for external equipment to detect motor speed, the motor outputs 6 square wave pulses per rotation)
- White Wire: forward / reverse rotation control: rotation of direction is CCW when the port is not connected; rotation of direction is CW when the port is connected to low level (≤0.6V)
- Blue Wire: speed
regulation control: input analog voltage (0~5V), speed is proportional to voltage
-
3650 Six-wire Motor Wiring Instructions:
-
-
- Red Wire: motor power supply positive pole (+) [DC power supply is selected according to motor specifications]
- Black Wire: motor power supply negative pole (-)
- Yellow Wire: FG signal output (for external equipment to detect motor speed, the motor outputs 6 square wave pulses per rotation)
- White Wire: forward / reverse rotation control: rotation of direction is CCW when the port is not connected; rotation of direction is CW when the port is connected to low level (≤0.6V)
- Blue Wire: Speed
regulation control: input analog voltage (0~5V), speed is proportional to voltage - Green Wire: brake: motor runs when not connected; motor brakes when connected to negative pole (-) (0V)
-
◆Note: The positive pole (+) and negative poles (-) of the motor cannot be connected in reverse!
The yellow wire is the speed signal wire and cannot be connected to the speed regulator!
The motor forbidden to be running in stall!
Application:
– Industrial Equipment: Enhance machinery and tools with reliable vibration feedback for better performance and user interaction.
– Medical Devices: Ensure accurate and effective haptic feedback in medical diagnostics and therapeutic equipment.
– Consumer Electronics: Improve user experience in gadgets such as gaming controllers, fitness equipment, and mobile devices with strong and responsive vibrations.
– Automotive: Integrate into automotive systems for tactile feedback and alert mechanisms, enhancing driver safety and comfort.
Keywords:
36mm brushless motor supplier, brushless motor micro, brushless dc electric motor factory, high efficiency brushless motor, brushless vibrating motor wholesale, 12v brushless dc motor, high-speed dc brushless motor on sale, brushless motor 4,000rpm, bldc 8,000rpm
