Reversible Brushless Motors with Gearbox Performance
The characteristics of this brushless geared motor include stable lifespan, about 3 – 5 times that of brushed motors, wide operating voltage range, low noise, high torque, stable and reliable performance, bi-directional rotation capability, emergency stop upon power loss, speed control, and speed measurement output.
| Model | NFP-GM37-BL3525 |
|---|---|
| Rated Voltage | 12V / 24V DC |
| No-load Speed | 4.5rpm – 930rpm |
| No-load Current | ≤0.1A / ≤0.13A |
| Rated Speed | 3rpm – 700rpm |
| Current | ≤0.3A / ≤0.4A |
| Torque | 0.04N.m – 3N.m |
| Max Output Power | 2W / 8W |
| Shaft Diameter | 6mm |
| Shaft Length | 21mm |
| D-cut Shaft Length | 12mm |
| Rotation | CW / CCW |
| Weight | 160g – 180g |
Model: NFP-GM37-BL3525-1260, 12V DC
| Ratio | No-load Speed | No-load Current | Rated Speed | Rated Current | Rated Torque | Stall Torque | Stall Current |
|---|---|---|---|---|---|---|---|
| 6.3:1 | 465rpm | ≤0.1A | 330rpm | ≤0.3A | 0.04N.m | ≥0.1Nm | ≤3A |
| 10:1 | 290rpm | ≤0.1A | 220rpm | ≤0.3A | 0.07N.m | ≥0.17Nm | ≤3A |
| 18.8:1 | 155rpm | ≤0.1A | 115rpm | ≤0.3A | 0.12N.m | ≥0.3Nm | ≤3A |
| 30:1 | 95rpm | ≤0.1A | 72rpm | ≤0.3A | 0.2N.m | ≥0.5Nm | ≤3A |
| 50:1 | 57rpm | ≤0.1A | 42rpm | ≤0.3A | 0.35N.m | ≥0.7Nm | ≤3A |
| 90:1 | 32rpm | ≤0.1A | 24rpm | ≤0.3A | 0.6N.m | ≥1.2Nm | ≤3A |
| 150:1 | 20rpm | ≤0.1A | 14rpm | ≤0.3A | 1N.m | ≥1.5Nm | ≤3A |
| 260:1 | 11rpm | ≤0.1A | 8rpm | ≤0.3A | 1.5N.m | ≥2Nm | ≤3A |
| 450:1 | 6rpm | ≤0.1A | 4rpm | ≤0.3A | 2.5N.m | ≥3Nm | ≤3A |
| 630:1 | 4.5rpm | ≤0.1A | 3rpm | ≤0.3A | 3N.m | ≥3Nm | ≤3A |
Note: all reduced no-load speeds have a tolerance of ±15%.
Model: NFP-GM37-BL3525-2460, 24V DC
| Ratio | No-load Speed | No-load Current | Rated Speed | Rated Current | Rated Torque | Stall Torque | Stall Current |
|---|---|---|---|---|---|---|---|
| 6.3:1 | 930rpm | ≤0.13A | 700rpm | ≤0.4A | 0.09N.m | ≥0.2Nm | ≤3A |
| 10:1 | 585rpm | ≤0.13A | 445rpm | ≤0.4A | 0.14N.m | ≥0.35Nm | ≤3A |
| 18.8:1 | 310rpm | ≤0.13A | 235rpm | ≤0.4A | 0.25N.m | ≥0.65Nm | ≤3A |
| 30:1 | 195rpm | ≤0.13A | 145rpm | ≤0.4A | 0.4N.m | ≥1Nm | ≤3A |
| 50:1 | 117rpm | ≤0.13A | 85rpm | ≤0.4A | 0.7N.m | ≥1.5Nm | ≤3A |
| 90:1 | 65rpm | ≤0.13A | 48rpm | ≤0.4A | 1.2N.m | ≥2.5Nm | ≤3A |
| 150:1 | 39rpm | ≤0.13A | 29rpm | ≤0.4A | 2.1N.m | ≥3Nm | ≤3A |
| 260:1 | 23rpm | ≤0.13A | 17rpm | ≤0.4A | 3N.m | ≥3Nm | ≤3A |
| 450:1 | 13rpm | ≤0.13A | 9rpm | ≤0.4A | 3N.m | ≥3Nm | ≤3A |
| 630:1 | 9rpm | ≤0.13A | 6rpm | ≤0.4A | 3N.m | ≥3Nm | ≤3A |
Note: all reduced no-load speeds have a tolerance of ±15%.
Micro Geared Brushless DC Motors Outline Drawing
Built-in Hall driver board, which can operate directly when powered on, without the need for external driver circuits.
All Metal Brushless Gear Motor Bracket Diagram
DC brushless gear motor widely used in smart home appliances, robots, smart machines, electric windows, electric doors, automatic rotating equipment, PTZ, food packaging, manipulators, communication equipment, printing equipment, vehicle industry, medical equipment, security equipment, office automation, model aircraft, and automotive electronics.
Micro DC Brushless High Torque Reducer Wiring Diagram
Red Wire: Positive pole of motor power supply +, polarity must not be reversed.
Black Wire: Negative pole of motor power supply -, polarity must not be reversed.
White Wire: Direction control wire. When disconnected, the motor rotates in one direction; connect to the negative terminal along with the black wire for reversing.
Blue Wire: PWM speed control wire, connect to a 0 – 5V pulse width modulator.
Yellow Wire: FG signal wire, outputs 9 square wave pulses. Speed can be determined by detecting the frequency of the pulses, similar to a single-wire encoder.
Mounting Bracket Outline Drawing
Keywords:
37mm brushless gear motor, NFP-GM37-BL3525, high torque motor, brushless DC motor, 12V brushless motor, precision motor
