BLDC Brushless Motor with Gearbox Key Features
Full ball bearing positioning means using ball bearings in key motor areas to decrease friction and handle various loads.
☑️ Ball Bearing Benefits: Increased Durability / Improved Precision / Reduced Noise / Maintenance Reduction
☑️ Full Metal Gears Benefits: Higher Load Capacity / Longer Lifespan / Enhanced Rigidity / Thermal Stability
| Model | NFP-GM37-BL3650 |
|---|---|
| Rated Voltage | 12V / 24V DC |
| No Load Speed | 5.2rpm – 1,300rpm |
| No Load Current | ≤0.2A / ≤0.32A |
| Max Output Power | 7W / 30W |
| Shaft Diameter | 6mm |
| Shaft Length | 21mm |
| D-cut Shaft Length | 12mm |
| Weight | appr. 280g |
Model: NFP-GM37-BL3650, 12V DC
| Ratio | No-load Speed | No-load Current | Rated Speed | Rated Current | Rated Torque | Power Cut Protection Current | Gearbox Length |
|---|---|---|---|---|---|---|---|
| 6.3:1 | 650rpm | ≤0.2A | 530rpm | ≤0.85A | 0.8kg.cm | 3A | 19mm |
| 10:1 | 415rpm | ≤0.2A | 335rpm | ≤0.85A | 1.2kg.cm | 3A | 19mm |
| 18.8:1 | 215rpm | ≤0.2A | 178rpm | ≤0.85A | 2.2kg.cm | 3A | 21.5mm |
| 30:1 | 135rpm | ≤0.2A | 112rpm | ≤0.85A | 3.5kg.cm | 3A | 21.5mm |
| 50:1 | 82rpm | ≤0.2A | 67.5rpm | ≤0.85A | 6kg.cm | 3A | 24mm |
| 90:1 | 45rpm | ≤0.2A | 37rpm | ≤0.85A | 11kg.cm | 3A | 24mm |
| 150:1 | 27rpm | ≤0.2A | 23rpm | ≤0.85A | 18kg.cm | 3A | 26.5mm |
| 270:1 | 15rpm | ≤0.2A | 13rpm | ≤0.85A | 32kg.cm | 3A | 26.5mm |
| 450:1 | 9rpm | ≤0.2A | 7.5rpm | ≤0.85A | ≤35kg.cm | 3A | 29mm |
| 650:1 | 6.3rpm | ≤0.2A | 5.5rpm | ≤0.85A | ≤35kg.cm | 3A | 29mm |
| 810:1 | 5.2rpm | ≤0.2A | 4.5rpm | ≤0.85A | ≤35kg.cm | 3A | 29mm |
Note: all reduced no-load speeds have a tolerance of ±15%.
Model: NFP-GM37-BL3650, 24V DC
| Ratio | No-load Speed | No-load Current | Rated Speed | Rated Current | Rated Torque | Power Cut Protection Current | Gearbox Length |
|---|---|---|---|---|---|---|---|
| 6.3:1 | 1,300rpm | ≤0.32A | 1,070rpm | ≤1.1A | 1.5kg.cm | 3A | 19mm |
| 10:1 | 830rpm | ≤0.32A | 670rpm | ≤1.1A | 2.5kg.cm | 3A | 19mm |
| 18.8:1 | 425rpm | ≤0.32A | 355rpm | ≤1.1A | 4.5kg.cm | 3A | 21.5mm |
| 30:1 | 270rpm | ≤0.32A | 225rpm | ≤1.1A | 7kg.cm | 3A | 21.5mm |
| 50:1 | 165rpm | ≤0.32A | 135rpm | ≤1.1A | 12kg.cm | 3A | 24mm |
| 90:1 | 90rpm | ≤0.32A | 75rpm | ≤1.1A | 22kg.cm | 3A | 24mm |
| 150:1 | 55rpm | ≤0.32A | 45rpm | ≤1.1A | ≤35kg.cm | 3A | 26.5mm |
| 270:1 | 30rpm | ≤0.32A | 27.5rpm | ≤0.6A | ≤35kg.cm | 3A | 26.5mm |
| 450:1 | 18rpm | ≤0.32A | 17rpm | ≤0.5A | ≤35kg.cm | 3A | 29mm |
| 650:1 | 12.5rpm | ≤0.32A | 12rpm | ≤0.4A | ≤35kg.cm | 3A | 29mm |
| 810:1 | 10.2rpm | ≤0.32A | 9.8rpm | ≤0.4A | ≤35kg.cm | 3A | 29mm |
Note: all reduced no-load speeds have a tolerance of ±15%.
Miniature Geared Electric Motors Outline Drawing
☑️ Brushless Internal Hall Driver Board Benefits: High Efficiency / Longevity / Low EMI / High Speed Operation (operate at higher speeds without the risk of brush wear or damage)
High Power Brushless Gear Motor Wiring Instruction
【Red Wire】Positive pole of motor power supply +, polarity must not be reversed.
【Black Wire】Negative pole of motor power supply –, polarity must not be reversed.
【White Wire】Direction control wire, when disconnected, the motor rotates in one direction; Connect to negative pole along with black wire for reversing.
【Blue Wire】PWM speed control wire, connect to a 0~5V pulse width modulator.
【Yellow Wire】FG signal wire, outputs 6 square wave pulses. Speed can be determined by detecting the frequency of the pulses (similar to a single-wire encoder).
Keywords:
36mm metal gear motor, NFP-GM37-BL3650, brushless motor, high torque motor, precision motor, 12V brushless motor, 24V motor
Order Samples
