Long Lifetime Vibration BLDC Motor Parameters
Long lifetime small diameter brushless vibration motor, super big amplitude, low noise. Can work continuously for 30,000 hours. Speed
| Motor Model | NFP-BL4260-SF |
|---|---|
| Motor Diameter | Φ42mm |
| Motor Total Length | 95mm |
| Rated Voltage | 12V / 24V DC |
| Rated Speed | 2,500rpm – 5,000rpm |
| Weight | About 360g |
| Eccentric Diameter | 39.5mm |
| Rotation | CW / CCW |
Note: all reduced no-load speeds have a tolerance of ±15%.
Features:
- ☞ Fan-shaped vibration head
Large swing head eccentric shaft: All made of high-quality metal materials, with the characteristics of corrosion resistance, not easy to rust, stable transmission ratio, not easy to heat and low noise. - ☞ Pure copper coil
Six-wire winding 100% pure copper wire: Pure copper wire has high resistance accuracy, stable and reliable, faster speed, stronger torque with reducer, small temperature coefficient, and can withstand high temperature. - ☞ High-quality magnetic tile
Good conductivity and long life, high work efficiency and low dynamic loss. Material: sintered NdFeB magnet three-layer treatment, good anti-rust ability, working temperature 80°-200°. - ☞ Built-in brushless drive
Plug and play, stable output: stable and reliable performance, with brushless coil protection board inside, can be forward and reverse rotation, and also with brake, speed regulation and speed measurement wire output.
Φ42mm Brushless Vibration Motor Outline Drawing
High-frequency Brushless DC Motor Wiring Instruction
Forward / Reverse Rotation Control (without speed regulation):
4260 Six-wire Motor Wiring Instructions:
- Red Wire: motor power supply positive pole (+) (DC10V-27V)
- Black Wire: motor power supply negative pole (-)
- Yellow Wire: FG signal output (for external equipment to detect motor speed, four-pole magnetic ring motor outputs 12 square wave pulses per rotation)
- White Wire: motor forward / reverse rotation control: rotation of direction is CCW when the port is not connected; rotation of direction is CW when the port is connected to low level (≤0.6V)
- Blue Wire: speed regulation control: speed regulation through PWM mode (duty cycle); the motor runs at full speed when blue wire connected to power supply negative pole (-) (0V)
- Green Wire: brake: motor runs when not connected; motor brakes when connected to negative pole (-) (0V)
◆Note: The positive pole (+) and negative poles (-) of the motor cannot be connected in reverse!
The yellow wire is the speed signal wire and cannot be connected to the speed regulator!
The motor forbidden to be running in stall!
Application:
Massage chair, Medical equipment, Smart home, Industrial equipment
Keywords:
brushless vibration motor, dc brushless vibration motor, brushless motor anti vibration, brushless vibration, motor brushless vibration
