6mm Mini DC Gear Motor – 17mm Type Performance
– Above specifications are subject to change without notice, just for reference and customizable according to requirements.
– Plastic output shaft is better to be used in those conditions need small torque, or of no radial load, or via coupling joint.
| Motor Model: | NFP-612-5.14-0675 |
|---|---|
| Total body length | 16.8mm |
| Motor body length | 12.2mm |
| Gearbox length | 4.6mm |
| Shaft diameter | D=2.0mm, D-section=1.5mm |
| Motor rated voltage | 3.0V DC |
| Rotation direction | CW / CCW |
| Motor no-load speed (approx) | 28,000rpm |
| Gearbox layers | 1 |
| Gear ratio | 1:5.14 |
| Gearmotor no-load speed | 5,400rpm |
| No load current (approx) | ≤ 30mA |
| Stall current | 455mA |
| Stall torque | 17 g.cm |
| Gear motor length | 16.85mm |
Miniature Geared Motor Outline Drawing
Typical Application:
These 6mm precision gear motors are widely used in electronic rotating mascaras, robotic mechanisms, medical equipments, etc. The gearbox is made of plastic material, RoHS compliant. The gear ratio can be adjusted as per buyers’ requirements.
Keywords:
custom dc gear motor, custom dc gear motor, 6mm miniature gearmotor, 6mm coreless motor, 6mm motor
