NFP-GM25-BL2838
25mm Metal Gear Motor
Technical information for your next design.
Review the specifications and drawings for the exact configuration. Match the mechanical envelope and operating requirements to your assembly.
- Rated voltage
- 12V / 24V DC
- No-load speed
- 12.5rpm – 2,700rpm
- Weight
- appr. 120g
01 / TECHNICAL REFERENCE
High Torque Brushless Motor with Gearbox Datasheet
Integrated Hall Effect Sensor Brushless Motor——Within rated torque range, 2838 series BLDC motor lifespan is over 2,000 hours with no maintenance required. (Exceeding the torque rating significantly reduces lifespan)
Electrical & performance data
| Rated Voltage | 12V / 24V DC |
|---|---|
| No-load Current | ≤0.3A / ≤0.4A |
| No-load Speed | 12.5rpm – 2,700rpm |
| Hall Signals | Outputs 3 signals per revolution |
Mechanical & operating data
| Model | NFP-GM25-BL2838 |
|---|---|
| Output Shaft Diameter | 4mm |
| Output Shaft Length | 12mm |
| Rotation | CW / CCW |
| Weight | appr. 120g |
Model: NFP-GM25-BL2838, 12V DC
| Ratio | Gearbox Length | No-load Current | No-load Speed | Rated Current | Rated Speed | Rated Torque | Stall Current | Stall Torque |
|---|---|---|---|---|---|---|---|---|
| 4.4:1 | 21mm | ≤0.3A | 1,360rpm | ≤0.7A | 1,090rpm | 0.5kg.cm | ≤3A | 2kg.cm |
| 9.3:1 | 21mm | ≤0.3A | 640rpm | ≤0.7A | 515rpm | 1.1kg.cm | ≤3A | 3.5kg.cm |
| 20:1 | 21mm | ≤0.3A | 300rpm | ≤0.7A | 240rpm | 2.3kg.cm | ≤3A | 9kg.cm |
| 34:1 | 23mm | ≤0.3A | 175rpm | ≤0.7A | 140rpm | 3.5kg.cm | ≤3A | 12kg.cm |
| 45:1 | 23mm | ≤0.3A | 130rpm | ≤0.7A | 105rpm | 4.5kg.cm | ≤3A | 12kg.cm |
| 57:1 | 25mm | ≤0.3A | 105rpm | ≤0.7A | 78rpm | 6kg.cm | ≤3A | 12kg.cm |
| 75:1 | 25mm | ≤0.3A | 80rpm | ≤0.7A | 65rpm | 7kg.cm | ≤3A | 12kg.cm |
| 100:1 | 25mm | ≤0.3A | 60rpm | ≤0.7A | 48rpm | ≤9kg.cm | ≤3A | 12kg.cm |
| 125:1 | 27mm | ≤0.3A | 48rpm | ≤0.7A | 40rpm | ≤9kg.cm | ≤3A | 12kg.cm |
| 217:1 | 27mm | ≤0.3A | 27rpm | ≤0.7A | 24rpm | ≤9kg.cm | ≤3A | 12kg.cm |
| 478:1 | 27mm | ≤0.3A | 12.5rpm | ≤0.7A | 11rpm | ≤9kg.cm | ≤3A | 12kg.cm |
Note: all reduced
no-load speeds
have a tolerance of ±15%.
Model: NFP-GM25-BL2838, 24V DC
| Ratio | Gearbox Length | No-load Current | No-load Speed | Rated Current | Rated Speed | Rated Torque | Stall Current | Stall Torque |
|---|---|---|---|---|---|---|---|---|
| 4.4:1 | 21mm | ≤0.4A | 2,700rpm | ≤1.2A | 2,180rpm | 1kg.cm | ≤2.5A | 4kg.cm |
| 9.3:1 | 21mm | ≤0.4A | 1,280rpm | ≤1.2A | 1,030rpm | 2.2kg.cm | ≤2.5A | 7kg.cm |
| 20:1 | 21mm | ≤0.4A | 600rpm | ≤1.2A | 480rpm | 4.5kg.cm | ≤2.5A | 12kg.cm |
| 34:1 | 23mm | ≤0.4A | 350rpm | ≤1.2A | 280rpm | 7kg.cm | ≤2.5A | 12kg.cm |
| 45:1 | 23mm | ≤0.4A | 260rpm | ≤1.2A | 210rpm | 9kg.cm | ≤2.5A | 12kg.cm |
| 57:1 | 25mm | ≤0.4A | 210rpm | ≤1.2A | 150rpm | 8kg.cm | ≤2.5A | 12kg.cm |
| 75:1 | 25mm | ≤0.4A | 160rpm | ≤1.2A | 140rpm | 8kg.cm | ≤2.5A | 12kg.cm |
| 100:1 | 25mm | ≤0.4A | 120rpm | ≤1.2A | 105rpm | 8kg.cm | ≤2.5A | 12kg.cm |
| 125:1 | 27mm | ≤0.4A | 96rpm | ≤1.2A | 85rpm | 8kg.cm | ≤2.5A | 12kg.cm |
| 217:1 | 27mm | ≤0.4A | 54rpm | ≤1.2A | 50rpm | 8kg.cm | ≤2.5A | 12kg.cm |
| 478:1 | 27mm | ≤0.4A | 25rpm | ≤1.2A | 11rpm | 8kg.cm | ≤3A | 12kg.cm |
Note: all reduced
no-load speeds
have a tolerance of ±15%.
02 / TECHNICAL REFERENCE
Compact Low RPM Brushless Motor Outline Drawing
NFP-GM25-BL2838-high-torsion-dc-brushless-motor-dimension
Open full size ↗
Gear motor structure with full stainless ball bearings: Low
friction resistance, low noise, long lifespan, quick heat
dissipation, high precision and strong composite
capabilities.
03 / TECHNICAL REFERENCE
Brushless Motor for Robotics | Efficient Gear Motor Wiring Diagram
Type 1:
When wiring the BLDC motor for operation, ensure red wire
connects to the positive power terminal, and both black and blue
wires connect to the negative power terminal. This configuration
will cause the motor to rotate in CW direction.
Type 2:
Red wire connects to the positive terminal of the power supply,
while black wire, blue wire, and yellow wire connect in parallel
to the negative terminal, causing the motor to reverse in a CCW
direction.
NFP-GM25-BL2838-brushless-gear-motor-for-power-tools-connections
Open full size ↗
– Blue wire: PWM speed control line, connecting to a 0-5V pulse
width modulator for adjusting motor speed.
– Green wire: Transmits the FG signal, providing a basic pulse
count of 3 signals per rotation to monitor motor speed and
position.
Keywords:
brushless motor manufacturer, 12v brushless dc motor high torque
low rpm, 25mm brushless geared motor for robotics, 60rpm gear
motor for locks, 60rpm gear motor, 80rpm BLDC motors.
Order Samples
ENGINEERING ENQUIRY
Discuss NFP-GM25-BL2838.
Send the model reference, available space, electrical requirements, operating conditions and expected quantity.