info@nfpmotor.com
Need For Power Electronics Co., Limited · +852 5142 2310
KH SERIES / DC GEAR MOTOR Illustrative render
Illustrative product rendering based on the GB22-110-DZ21001-2NS1-M12 assembly drawing
22 mm body / gearbox Source page 29 / 41

GB22-110-DZ21001-2NS1-M12

22 mm 110:1 DC planetary gearmotor

Compact motion. Precisely geared.

22 mm planetary gearbox with a 110:1 reduction ratio and a 12 V DC motor.

Rated voltage
12.0 V DC
Operating temperature
−20 to +70 °C
No-load speed
58±5 rpm
No-load current
≤300 mA

Part / series no. GB22-110-DZ21001-2NS1-M12

01 / TECHNICAL DATA

Specifications at a glance.

110:1

Electrical performance, construction and operating data for the specified configuration or motor family.

Electrical & drive

Electrical & drive
Rated voltage 12.0 V DC
No-load current ≤300 mA
Rated current ≤600 mA
Stall current 2.4 A

Mechanical & operating data

Mechanical & operating data
Operating temperature −20 to +70 °C
No-load speed 58±5 rpm
Rated torque 0.25 N·m
Rated speed 52±3 rpm
Stall torque ≥2 N·m
Direction CW/CCW
Noise ≤55 dB
Gearbox ratio 110:1
Assembly length 94.0 mm
Motor length 55.7 mm
Storage temperature −20 to +80 °C
Service life 500 h
Start cycles 30,000
Technical notes
  • Gearbox operation shall be free of abnormal noise.
  • Output end cap color: black RAL9005.
  • Dimensions marked with an asterisk require key inspection.
  • After 20 min of no-load running, the motor and gearbox shall show no obvious heating; maximum 70 °C.
  • At −20 °C, no-load current within 2 s shall be below 0.7 A.
  • Service life requirement: 500 h and 30,000 starts.
  • Customer drawing number: 424-1-18C-01F.
  • Noise measured with the assembly placed horizontally, at a distance of 5 cm.
  • The shaft magnet must be tightly fitted onto the motor shaft.
  • Zinc-alloy outside diameter: Ø13.6 +0.05/0 mm; minimize play.
  • General dimensional tolerances, GB/T 1804: under 3 mm ±0.05 mm; 3–6 mm ±0.05 mm; 6–20 mm ±0.1 mm; above 20 mm ±0.15 mm.

02 / MECHANICAL REFERENCE

Dimensions & assembly layout.

English drawing labels with original dimensions and tolerances. Open the image to inspect the full drawing.

Outline drawing Unit: mm
GB22-110-DZ21001-2NS1-M12 outline dimensions and assembly geometry
Outline drawing · Dimensions and tolerances retained from source drawing.

04 / DESIGN INTEGRATION

From drawing to your mechanism.

01 / FIT

Confirm the envelope.

Review the gearbox dimensions, mounting interface, shaft geometry and connection clearance in the outline drawing.

Review dimensions ↑
02 / SELECT

Match the operating point.

Specify the supply voltage, speed, torque and duty cycle. Use the complete part code when selecting a configuration.

Review original data ↗
03 / VALIDATE

Evaluate in your assembly.

Check start-up behavior, load, clearances and operating temperature in the intended mechanism.

Discuss your application ↗

ENGINEERING ENQUIRY

Discuss this drive for your design.

Send your operating requirements and expected quantity. Reference GB22-110-DZ21001-2NS1-M12.

Contact NFP Motor ↗
Technical source FORWA / KH catalogue · Page 29 · GB22-110-DZ21001-2NS1-M12 Download source PDF ↓

Product image: AI-generated illustrative render based on the assembly drawing. Exact dimensions and variant details follow the technical drawing and specification tables.