NFP-GM12-10BY-M4-L
10mm Micro Step Gear Motor – 20mm Type
Technical information for your next design.
Review the specifications and drawings for the exact configuration. Match the mechanical envelope and operating requirements to your assembly.
- Rated voltage
- 5V DC (Driver IC: L6219)
- Weight
- Appr. 12g
01 / TECHNICAL REFERENCE
Permanent Magnet Brushless Stepper Gear Reduction Motor Parameters
Stepper control: Convert electrical pulse signals into angular displacement control for easy intelligent control.
All-metal gears: Adopting all-metal gear material, it is more wear-resistant and prolongs service life.
Threaded shaft: flange nut available.
Application: Intelligent robots, intelligent manipulators, intelligent furniture, intelligent focusing systems, miniature pan/tilts, etc.
Features: The lower the reduction ratio, the larger the step angle and the smaller the torque; The larger the reduction ratio, the smaller the step angle and the greater the torque. All-metal reducer, brushless stepper micromotor, M4 standard screw shaft.
Electrical & performance data
| Phase Resistance | 39Ω±7% / Phase |
|---|---|
| Phase Current | 128mA / Phase |
| Phase Inductance | 14.3 mH / Phase |
| Step Angle | 18° / Step |
| No. of Phases | 2Phases 4Wires |
| Max. Starting Frequency | 1200PPS Min. |
| Max. Response Frequency | 900PPS Min. |
| Rated Voltage | 5V DC (Driver IC: L6219) |
Mechanical & operating data
| Motor Model | NFP-GM12-10BY-M4-L |
|---|---|
| Motor Size | Φ10mm*12mm*20mm |
| Shaft Diameter | ΦM4 |
| Output Shaft Length | 55mm (customizable in batches) |
| Weight | Appr. 12g |
| Wires Sequence | Red A- / White A+ / Black B- / Brown B+ |
Permanent Magnet Brushless Stepper Gear Reduction Motor Parameters
| Ratio | Precise Ratio | Step Angle | Holding Torque | Pull-out Torque |
|---|---|---|---|---|
| 1:30 | 29.47 | 0.61° | 0.36 kgf.cm | 0.09 kgf.cm |
| 1:50 | 51.1 | 0.35° | 0.6 kgf.cm | 0.15 kgf.cm |
| 1:100 | 99.3 | 0.18° | 1.2 kgf.cm | 0.3 kgf.cm |
| 1:298 | 297.9 | 0.06° | Max. 3 kgf.cm | 0.9 kgf.cm |
02 / TECHNICAL REFERENCE
Brushless Stepper Screw Shaft Gear Reduction Motor Outline Drawing
Brushless Stepper Screw Shaft Gear Reduction Motor Outline Drawing
Open full size ↗
Brushless Stepper Screw Shaft Gear Reduction Motor Outline Drawing
Open full size ↗
If the flange coupling is required, please note when placing an
order!!!
03 / TECHNICAL REFERENCE
Long Shaft M4 Thread Miniature BLDC Step Motors Connection Diagram
Long Shaft M4 Thread Miniature BLDC Step Motors Connection Diagram
Open full size ↗
Terminal wiring sequence description: 1.25-4Y Wiring terminal,
Wire: GB1571 30/UL, AWM, 105°
ENGINEERING ENQUIRY
Discuss NFP-GM12-10BY-M4-L.
Send the model reference, available space, electrical requirements, operating conditions and expected quantity.