NFP-GM12-10BY-M3-L
10mm Mini Stepper Gear Motor – 20mm Type
Technical information for your next design.
Review the specifications and drawings for the exact configuration. Match the mechanical envelope and operating requirements to your assembly.
- Rated voltage
- 5V DC (Driver IC: L6219)
- Weight
- Appr. 11g
01 / TECHNICAL REFERENCE
Permanent Magnet Brushless Stepper Gear Reduction Motor Parameters
Stepper control: Convert electrical pulse signals into angular displacement control for easy intelligent control.
All-metal gears: Adopting all-metal gear material, it is more wear-resistant and prolongs service life.
Threaded shaft: flange nut available.
Application: Intelligent robots, intelligent manipulators, intelligent furniture, intelligent focusing systems, miniature pan/tilts, etc.
Features: The lower the reduction ratio, the larger the step angle and the smaller the torque; The larger the reduction ratio, the smaller the step angle and the greater the torque. All-metal reducer, brushless stepper micromotor, M3 standard screw shaft.
Electrical & performance data
| Phase Resistance | 39Ω±7% / Phase |
|---|---|
| Phase Current | 128mA / Phase |
| Phase Inductance | 14.3 mH / Phase |
| Step Angle | 18° / Step |
| No. of Phases | 2Phases 4Wires |
| Max. Starting Frequency | 1200PPS Min. |
| Max. Response Frequency | 900PPS Min. |
| Rated Voltage | 5V DC (Driver IC: L6219) |
Mechanical & operating data
| Motor Model | NFP-GM12-10BY-M3-L |
|---|---|
| Motor Size | Φ10mm*12mm*20mm |
| Shaft Diameter | ΦM3 |
| Output Shaft Length | 33.6mm (A/B-type) / 32.3mm (C-type) |
| Weight | Appr. 11g |
| Wires Sequence | Red A- / White A+ / Black B- / Brown B+ |
Permanent Magnet Brushless Stepper Gear Reduction Motor Parameters
| Ratio | Precise Ratio | Step Angle | Holding Torque | Pull-out Torque |
|---|---|---|---|---|
| 1: 10 | 9.68 | 1.86° | 0.12 kgf.cm | 0.03 kgf.cm |
| 1: 20 | 19.36 | 0.93° | 0.24 kgf.cm | 0.06 kgf.cm |
| 1: 30 | 29.47 | 0.61° | 0.36 kgf.cm | 0.09 kgf.cm |
| 1: 50 | 51.1 | 0.35° | 0.6 kgf.cm | 0.15 kgf.cm |
| 1: 100 | 99.3 | 0.18° | 1.2 kgf.cm | 0.3 kgf.cm |
| 1: 150 | 150.96 | 0.12° | 1.8 kgf.cm | 0.45 kgf.cm |
| 1: 210 | 209.76 | 0.086° | 2.5 kgf.cm | 0.63 kgf.cm |
| 1: 298 | 297.9 | 0.06° | Max. 3 kgf.cm | 0.9 kgf.cm |
| 1: 380 | 379.16 | 0.047° | Max. 3 kgf.cm | 1.1 kgf.cm |
02 / TECHNICAL REFERENCE
Brushless Screw Shaft Stepper Gear Reduction Motor Outline Drawing
Brushless Screw Shaft Stepper Gear Reduction Motor Outline Drawing
Open full size ↗
Brushless Screw Shaft Stepper Gear Reduction Motor Outline Drawing
Open full size ↗
A-type Straight Thread 👇
Brushless Screw Shaft Stepper Gear Reduction Motor Outline Drawing
Open full size ↗
B-type with Location Pillar 👇
Brushless Screw Shaft Stepper Gear Reduction Motor Outline Drawing
Open full size ↗
C-type with Location Pillar & Protective Shell 👇
Brushless Screw Shaft Stepper Gear Reduction Motor Outline Drawing
Open full size ↗
If the flange coupling is required, please note when placing an
order!!!
03 / TECHNICAL REFERENCE
Long Shaft M3 Thread Shaft BLDC Step Motors Connection Diagram
Long Shaft M3 Thread Shaft BLDC Step Motors Connection Diagram
Open full size ↗
Terminal wiring sequence description: 1.25-4Y Wiring terminal,
Wire: GB1571 30/UL, AWM, 105°
ENGINEERING ENQUIRY
Discuss NFP-GM12-10BY-M3-L.
Send the model reference, available space, electrical requirements, operating conditions and expected quantity.