NFP-GM12-10BY-SG
10mm Stepper Steel Gear Motor – 20mm Type
Technical information for your next design.
Review the specifications and drawings for the exact configuration. Match the mechanical envelope and operating requirements to your assembly.
- Rated voltage
- 5V DC (Driver IC: L6219)
- Weight
- Appr. 9g
01 / TECHNICAL REFERENCE
Tiny DC Brushless Stepper Gear Reduction Motor Parameters
Stepper control: Convert electrical pulse signals into angular displacement control for easy intelligent control.
High gear precision: wear-resistant, strong torque resistance, long life, fast heat dissipation, strong composite ability.
D-shaped output shaft: more convenient to install, not easy to slip, save installation time.
Steel plate structure/steel gear: reducer gear shaft is more stable, long life, and can resist high torque application.
Application: Smart gimbal, electric selfie stick, mobile camera tracking equipment, robot, smart manipulator, micro-printing equipment, etc.
Electrical & performance data
| Phase Resistance | 39Ω±7% / Phase |
|---|---|
| Phase Current | 128mA / Phase |
| Phase Inductance | 14.3 mH / Phase |
| Step Angle | 18° / Step |
| No. of Phases | 2Phases 4Wires |
| Max. Starting Frequency | 1200PPS Min. |
| Max. Response Frequency | 900PPS Min. |
| Rated Voltage | 5V DC (Driver IC: L6219) |
Mechanical & operating data
| Motor Model | NFP-GM12-10BY-SG |
|---|---|
| Motor Size | Φ10mm*12mm*20mm |
| Shaft Diameter | Φ3mm (D-cut: 2.5mm) |
| Output Shaft Length | 10mm |
| Weight | Appr. 9g |
| Wires Sequence | Red A- / White A+ / Black B- / Brown B+ |
Tiny DC Brushless Stepper Gear Reduction Motor Parameters
| Ratio | Precise Ratio | Step Angle | Holding Torque | Pull-out Torque |
|---|---|---|---|---|
| 1: 10 | 9.68 | 1.86° | 0.12 kgf.cm | 0.03 kgf.cm |
| 1: 20 | 19.36 | 0.93° | 0.24 kgf.cm | 0.06 kgf.cm |
| 1: 30 | 29.47 | 0.61° | 0.36 kgf.cm | 0.09 kgf.cm |
| 1: 50 | 51.1 | 0.35° | 0.6 kgf.cm | 0.15 kgf.cm |
| 1: 100 | 99.3 | 0.18° | 1.2 kgf.cm | 0.3 kgf.cm |
| 1: 150 | 150.96 | 0.12° | 1.8 kgf.cm | 0.45 kgf.cm |
| 1: 210 | 209.76 | 0.086° | 2.5 kgf.cm | 0.63 kgf.cm |
| 1: 298 | 297.9 | 0.06° | Max. 3 kgf.cm | 0.9 kgf.cm |
| 1: 380 | 379.16 | 0.047° | Max. 3 kgf.cm | 1.1 kgf.cm |
02 / TECHNICAL REFERENCE
Brushless Steel Gear Stepper Reduction Motor Outline Drawing
Brushless Steel Gear Stepper Reduction Motor Outline Drawing
Open full size ↗
03 / TECHNICAL REFERENCE
10BY Brushless DC Stepping Gear Motors Connection Diagram
10BY Brushless DC Stepping Gear Motors Connection Diagram
Open full size ↗
Terminal wiring sequence description: 1.25-4Y Wiring terminal,
Wire: GB1571 30/UL, AWM, 105°
ENGINEERING ENQUIRY
Discuss NFP-GM12-10BY-SG.
Send the model reference, available space, electrical requirements, operating conditions and expected quantity.