Mechanical fit
Check the gearbox, output shaft and mounting features. Allow space for terminals, wiring and any rear shaft.
Review the drawings ↓NFP-GM12-N20-M4
Compact geared output for your mechanism.
Compare the published winding and gearing configurations. Match the output shaft, operating point and mounting envelope to your assembly.
01 / TECHNICAL DATA
Choose the voltage, winding and reduction ratio together. Values below apply to the listed configurations; original units and tolerances are retained.
Motor specifications
| Rated Voltage | 6V / 12V DC |
|---|---|
| No-load Speed | 28rpm – 2,250rpm |
| No-load Current | ≤0.065A / ≤0.08A |
| Model | NFP-GM12-N20-M4 |
|---|---|
| Threaded Shaft Length | 55mm |
| Rotation | CW / CCW |
| Weight | appr. 15g |
| Ratio | No-load Current | No-load Speed | Rated Current | Rated Speed | Rated Torque | Stall Current | Stall Torque |
|---|---|---|---|---|---|---|---|
| 10:1 | ≤0.065A | 1,050rpm | ≤0.2A | 700rpm | 0.05kg.cm | ≤0.35A | 0.1kg.cm |
| 15:1 | ≤0.08A | 750rpm | ≤0.35A | 460rpm | 0.07kg.cm | ≤0.65A | 0.14kg.cm |
| 20:1 | ≤0.065A | 520rpm | ≤0.2A | 350rpm | 0.1kg.cm | ≤0.35A | 0.18kg.cm |
| 30:1 | ≤0.065A | 350rpm | ≤0.2A | 200rpm | 0.15kg.cm | ≤0.35A | 0.3kg.cm |
| 50:1 | ≤0.065A | 210rpm | ≤0.2A | 120rpm | 0.25kg.cm | ≤0.35A | 0.4kg.cm |
| 100:1 | ≤0.065A | 105rpm | ≤0.2A | 65rpm | 0.45kg.cm | ≤0.35A | 0.8kg.cm |
| 150:1 | ≤0.065A | 70rpm | ≤0.2A | 45rpm | 0.7kg.cm | ≤0.35A | 1kg.cm |
| 210:1 | ≤0.065A | 50rpm | ≤0.2A | 30rpm | 1kg.cm | ≤0.35A | 1.8kg.cm |
| 298:1 | ≤0.065A | 35rpm | ≤0.2A | 20rpm | 1.4kg.cm | ≤0.35A | 2.5kg.cm |
| 380:1 | ≤0.065A | 28rpm | ≤0.2A | 17rpm | 2kg.cm | ≤0.35A | 3kg.cm |
| Ratio | No-load Current | No-load Speed | Rated Current | Rated Speed | Rated Torque | Stall Current | Stall Torque |
|---|---|---|---|---|---|---|---|
| 10:1 | ≤0.08A | 2,250rpm | ≤0.35A | 1,000rpm | 0.11kg.cm | ≤0.65A | 0.17kg.cm |
| 15:1 | ≤0.08A | 1,500rpm | ≤0.35A | 660rpm | 0.15kg.cm | ≤0.65A | 0.24kg.cm |
| 20:1 | ≤0.08A | 1,150rpm | ≤0.35A | 500rpm | 0.2kg.cm | ≤0.65A | 0.32kg.cm |
| 30:1 | ≤0.08A | 760rpm | ≤0.35A | 380rpm | 0.3kg.cm | ≤0.65A | 0.5kg.cm |
| 50:1 | ≤0.08A | 460rpm | ≤0.35A | 230rpm | 0.5kg.cm | ≤0.65A | 0.8kg.cm |
| 100:1 | ≤0.08A | 225rpm | ≤0.35A | 130rpm | 0.95kg.cm | ≤0.65A | 1.7kg.cm |
| 150:1 | ≤0.08A | 152rpm | ≤0.35A | 85rpm | 1.5kg.cm | ≤0.65A | 2kg.cm |
| 210:1 | ≤0.08A | 110rpm | ≤0.35A | 60rpm | 2kg.cm | ≤0.65A | 3.5kg.cm |
| 298:1 | ≤0.08A | 77rpm | ≤0.35A | 45rpm | 2.3kg.cm | ≤0.65A | 4.5kg.cm |
| 380:1 | ≤0.08A | 60rpm | ≤0.35A | 40rpm | 3kg.cm | ≤0.65A | 5.5kg.cm |
Note: all reduced no-load speeds have a tolerance of ±15%.
02 / MECHANICAL & ELECTRICAL INTERFACE
03 / DESIGN INTEGRATION
Check the gearbox, output shaft and mounting features. Allow space for terminals, wiring and any rear shaft.
Review the drawings ↓Select the winding for your supply and duty cycle. Check the listed rated and stall currents when choosing the controller.
Compare configurations ↑Define the required speed and torque at the output. Evaluate the selected ratio and motor in the finished mechanism.
Discuss your application ↗ENGINEERING ENQUIRY
Include the winding, gear ratio, target speed and torque, output shaft, duty cycle and expected quantity.