info@nfpmotor.com
Need For Power Electronics Co., Limited · +852 5142 2310
12 MM CLASS / SPUR GEARMOTOR NFP-GM12-N20D spur gear motor

NFP-GM12-N20D

12 mm spur gear motor

Compact geared output for your mechanism.

Compare the published winding and gearing configurations. Match the output shaft, operating point and mounting envelope to your assembly.

Published voltage options
3 / 6 / 12 V
Published gear ratios
See configurations
Shaft diameter
Φ3mm x L26mm
Output configuration
26 mm D shaft

01 / TECHNICAL DATA

Specifications & configurations.

Choose the voltage, winding and reduction ratio together. Values below apply to the listed configurations; original units and tolerances are retained.

Motor specifications

Electrical & performance data

Motor specifications — Electrical & performance data
Rated Voltage 3V / 6V / 12V DC
No-load Speed 21rpm – 72rpm
No-load Current ≤0.03A / ≤0.035A / ≤0.04A / ≤0.045A / ≤0.05A

Mechanical & operating data

Motor specifications — Mechanical & operating data
Model NFP-GM12-N20D
Ratio 100:1, 298:1
Shaft Diameter Φ3mm x L26mm
Rotation CW / CCW
Weight appr. 10g

Ratio: 100:1 parameters sheet👇 7 configuration options

Ratio: 100:1 parameters sheet👇
Voltage Model No-load Speed No-load Current Rated Torque Rated Speed Rated Current Stall Torque Stall Current
3V A26 81rpm ≤0.045A 0.25kg.cm 47rpm ≤0.14A 0.8kg.cm ≤0.35A
3V A45 120rpm ≤0.045A 0.4kg.cm 80rpm ≤0.27A 1kg.cm ≤0.65A
3V A15 150rpm ≤0.08A 0.25kg.cm 105rpm ≤0.35A 0.7kg.cm ≤0.9A
6V A35 105rpm ≤0.04A 0.2kg.cm 75rpm ≤0.1A 0.8kg.cm ≤0.3A
6V A26 165rpm ≤0.045A 0.5kg.cm 98rpm ≤0.23A 1.1kg.cm ≤0.55A
12V A05 150rpm ≤0.03A 0.2kg.cm 120rpm ≤0.07A 0.8kg.cm ≤0.3A
12V A35 215rpm ≤0.055A 0.5kg.cm 145rpm ≤0.2A 1.3kg.cm ≤0.5A

Ratio: 298:1 parameters sheet👇 8 configuration options

Ratio: 298:1 parameters sheet👇
Voltage Model No-load Speed No-load Current Rated Torque Rated Speed Rated Current Stall Torque Stall Current
3V A26 27rpm ≤0.035A 1.2kg.cm 15rpm ≤0.18A 2.5kg.cm ≤0.35A
3V A45 40rpm ≤0.045A 1.2kg.cm 26rpm ≤0.27A 3kg.cm ≤0.65A
3V A15 50rpm ≤0.05A 1.2kg.cm 30rpm ≤0.33A 3kg.cm ≤0.75A
6V A05 26rpm ≤0.03A 0.6kg.cm 10rpm ≤0.08A 1.3kg.cm ≤0.2A
6V A35 36rpm ≤0.04A 1.2kg.cm 18rpm ≤0.15A 2.3kg.cm ≤0.3A
6V A26 55rpm ≤0.05A 1.5kg.cm 32rpm ≤0.25A 3kg.cm ≤0.6A
12V A05 50rpm ≤0.04A 1.2kg.cm 28rpm ≤0.1A 2.6kg.cm ≤0.3A
12V A35 72rpm ≤0.035A 1.5kg.cm 45rpm ≤0.2A 3kg.cm ≤0.6A
Operating notes & dimensional information

Note: all reduced no-load speeds have a tolerance of ±15%.

02 / MECHANICAL & ELECTRICAL INTERFACE

Drawings & connections.

N20 Metal Miniature Gear Motor Mechanical Drawing

Open full size ↗
NFP-GM12-N20D — N20 Metal Miniature Gear Motor Mechanical Drawing
NFP-GM12-N20D · Original published technical reference. Check all dimensions, tolerances and connection labels for the selected configuration.

03 / DESIGN INTEGRATION

From gearmotor to mechanism.

01

Mechanical fit

Check the gearbox, output shaft and mounting features. Allow space for terminals, wiring and any rear shaft.

Review the drawings ↓
02

Electrical selection

Select the winding for your supply and duty cycle. Check the listed rated and stall currents when choosing the controller.

Compare configurations ↑
03

Load & validation

Define the required speed and torque at the output. Evaluate the selected ratio and motor in the finished mechanism.

Discuss your application ↗

ENGINEERING ENQUIRY

Discuss NFP-GM12-N20D.

Include the winding, gear ratio, target speed and torque, output shaft, duty cycle and expected quantity.

Contact NFP Motor ↗