info@nfpmotor.com
Need For Power Electronics Co., Limited · +852 5142 2310
12 MM CLASS / SPUR GEARMOTOR NFP-GM12-N20-M3 spur gear motor
Threaded output shaft View the 12 mm range ↗

NFP-GM12-N20-M3

12 mm spur gear motor

Compact geared output for your mechanism.

Compare the published winding and gearing configurations. Match the output shaft, operating point and mounting envelope to your assembly.

Published voltage options
3 / 6 / 12 V
Published gear ratios
See configurations
Drive construction
Brushed DC
Output configuration
Threaded output shaft

01 / TECHNICAL DATA

Specifications & configurations.

Choose the voltage, winding and reduction ratio together. Values below apply to the listed configurations; original units and tolerances are retained.

Motor specifications

Electrical & performance data

Motor specifications — Electrical & performance data
Rated Voltage 3V / 6V / 12V DC
No-load Speed 27rpm – 72rpm
No-load Current ≤0.03A / ≤0.035A / ≤0.04A / ≤0.045A / ≤0.05A / ≤0.2A

Mechanical & operating data

Motor specifications — Mechanical & operating data
Model NFP-GM12-N20-M3
Shaft Length 20mm
Rotation CW / CCW
Weight appr. 10g

Ratio: 298:1 Parameters 9 configuration options

Ratio: 298:1 Parameters
Voltage Model No-load Speed No-load Current Rated Torque Rated Speed Rated Current Stall Torque Stall Current
3V A26 27rpm ≤0.035A 1.2kg.cm 15rpm ≤0.18A 2.5kg.cm ≤0.35A
3V A45 40rpm ≤0.045A 1.2kg.cm 26rpm ≤0.27A 3kg.cm ≤0.65A
3V A15 50rpm ≤0.05A 1.2kg.cm 30rpm ≤0.33A 3kg.cm ≤0.75A
6V A05 26rpm ≤0.03A 0.6kg.cm 10rpm ≤0.08A 1.3kg.cm ≤0.2A
6V A35 36rpm ≤0.04A 1.2kg.cm 18rpm ≤0.15A 2.3kg.cm ≤0.3A
6V A26 55rpm ≤0.05A 1.5kg.cm 32rpm ≤0.25A 3kg.cm ≤0.6A
6V K100 105rpm ≤0.2A 2.4kg.cm 56rpm ≤0.9A 3kg.cm ≤2A
12V A05 50rpm ≤0.04A 1.2kg.cm 28rpm ≤0.1A 2.6kg.cm ≤0.3A
12V A35 72rpm ≤0.05A 1.5kg.cm 45rpm ≤0.2A 3kg.cm ≤0.6A
Operating notes & dimensional information

Note: all reduced no-load speeds have a tolerance of ±15%.

02 / MECHANICAL & ELECTRICAL INTERFACE

Drawings & connections.

DC Gear Motor M3 Screw Axis Outline Drawing

Open full size ↗
NFP-GM12-N20-M3 — DC Gear Motor M3 Screw Axis Outline Drawing
NFP-GM12-N20-M3 · Original published technical reference. Check all dimensions, tolerances and connection labels for the selected configuration.

03 / DESIGN INTEGRATION

From gearmotor to mechanism.

01

Mechanical fit

Check the gearbox, output shaft and mounting features. Allow space for terminals, wiring and any rear shaft.

Review the drawings ↓
02

Electrical selection

Select the winding for your supply and duty cycle. Check the listed rated and stall currents when choosing the controller.

Compare configurations ↑
03

Load & validation

Define the required speed and torque at the output. Evaluate the selected ratio and motor in the finished mechanism.

Discuss your application ↗

ENGINEERING ENQUIRY

Discuss NFP-GM12-N20-M3.

Include the winding, gear ratio, target speed and torque, output shaft, duty cycle and expected quantity.

Contact NFP Motor ↗