info@nfpmotor.com
Need For Power Electronics Co., Limited · +852 5142 2310
12 MM CLASS / SPUR GEARMOTOR NFP-GM12-N20T spur gear motor
Threaded output shaft View the 12 mm range ↗

NFP-GM12-N20T

12 mm spur gear motor

Compact geared output for your mechanism.

Compare the published winding and gearing configurations. Match the output shaft, operating point and mounting envelope to your assembly.

Published voltage options
3 / 6 / 12 V
Published gear ratios
See configurations
Drive construction
Brushed DC
Output configuration
Threaded output shaft

01 / TECHNICAL DATA

Specifications & configurations.

Choose the voltage, winding and reduction ratio together. Values below apply to the listed configurations; original units and tolerances are retained.

Gearmotor performance 7 configuration options

Gearmotor performance
Voltage Model No-load Speed No-load Current Rated Torque Rated Speed Rated Current Stall Torque Stall Current
3V A45 240rpm ≤0.045A 0.1kg.cm 200rpm ≤0.19A ≥0.7kg.cm ≤0.95A
3V A26 170rpm ≤0.025A 0.1kg.cm 130rpm ≤0.10A ≥0.4kg.cm ≤0.4A
6V A26 340rpm ≤0.045A 0.2kg.cm 275rpm ≤0.15A ≥0.65kg.cm ≤0.64A
6V A35 210rpm ≤0.035A 0.2kg.cm 115rpm ≤0.14A ≥0.2kg.cm ≤0.2A
6V A05 150rpm ≤0.02A 0.1kg.cm 110rpm ≤0.07A ≥0.15kg.cm ≤0.3A
12V A05 310rpm ≤0.025A 0.2kg.cm 150rpm ≤0.06A ≥0.4kg.cm ≤0.6A
12V A35 420rpm ≤0.04A 0.15kg.cm 230rpm ≤0.27A ≥0.25kg.cm ≤0.7A
Operating notes & dimensional information

Note: all reduced no-load speeds have a tolerance of ±15%.

02 / MECHANICAL & ELECTRICAL INTERFACE

Drawings & connections.

Compact DC Motor with Gearbox Mechanical Dimension

Open full size ↗
NFP-GM12-N20T — Compact DC Motor with Gearbox Mechanical Dimension
NFP-GM12-N20T · Original published technical reference. Check all dimensions, tolerances and connection labels for the selected configuration.

03 / DESIGN INTEGRATION

From gearmotor to mechanism.

01

Mechanical fit

Check the gearbox, output shaft and mounting features. Allow space for terminals, wiring and any rear shaft.

Review the drawings ↓
02

Electrical selection

Select the winding for your supply and duty cycle. Check the listed rated and stall currents when choosing the controller.

Compare configurations ↑
03

Load & validation

Define the required speed and torque at the output. Evaluate the selected ratio and motor in the finished mechanism.

Discuss your application ↗

ENGINEERING ENQUIRY

Discuss NFP-GM12-N20T.

Include the winding, gear ratio, target speed and torque, output shaft, duty cycle and expected quantity.

Contact NFP Motor ↗