Mechanical fit
Check the gearbox, output shaft and mounting features. Allow space for terminals, wiring and any rear shaft.
Review the drawings ↓NFP-GM1024-N30-M4
Compact geared output for your mechanism.
Compare the published winding and gearing configurations. Match the output shaft, operating point and mounting envelope to your assembly.
01 / TECHNICAL DATA
Choose the voltage, winding and reduction ratio together. Values below apply to the listed configurations; original units and tolerances are retained.
Motor specifications
| Rated Voltage | 6V / 12V DC |
|---|---|
| No-load Speed | 15rpm – 320rpm |
| No-load Current | ≤0.045A / ≤0.065A |
| Model | NFP-GM1024-N30-M4 |
|---|---|
| Shaft Diameter | 3mm |
| Shaft Length | 10mm |
| Rotation | CW / CCW |
| Weight | appr. 18g |
| Ratio | Gearbox Length | No-load Current | No-load Speed | Rated Current | Rated Speed | Rated Torque | Stall Current | Stall Torque |
|---|---|---|---|---|---|---|---|---|
| 50:1 | 9mm | ≤0.045A | 155rpm | ≤0.15A | 100rpm | 0.17kg.cm | ≤0.3A | ≥0.6kg.cm |
| 100:1 | 9mm | ≤0.045A | 78rpm | ≤0.15A | 50rpm | 0.35kg.cm | ≤0.3A | ≥1.2kg.cm |
| 150:1 | 9mm | ≤0.045A | 52rpm | ≤0.15A | 33rpm | 0.5kg.cm | ≤0.3A | ≥1.8kg.cm |
| 200:1 | 9mm | ≤0.045A | 38rpm | ≤0.15A | 25rpm | 0.7kg.cm | ≤0.3A | ≥2.4kg.cm |
| 350:1 | 9mm | ≤0.045A | 22rpm | ≤0.15A | 14rpm | 1.2kg.cm | ≤0.3A | ≤3kg.cm |
| 500:1 | 9mm | ≤0.045A | 15rpm | ≤0.15A | 10rpm | 2.5kg.cm | ≤0.3A | ≤3kg.cm |
| Ratio | Gearbox Length | No-load Current | No-load Speed | Rated Current | Rated Speed | Rated Torque | Stall Current | Stall Torque |
|---|---|---|---|---|---|---|---|---|
| 50:1 | 9mm | ≤0.065A | 320rpm | ≤0.25A | 220rpm | 0.35kg.cm | ≤0.6A | ≥1.2kg.cm |
| 100:1 | 9mm | ≤0.065A | 160rpm | ≤0.25A | 110rpm | 0.7kg.cm | ≤0.6A | ≥2.4kg.cm |
| 150:1 | 9mm | ≤0.065A | 105rpm | ≤0.25A | 72rpm | 1kg.cm | ≤0.6A | ≤3kg.cm |
| 200:1 | 9mm | ≤0.065A | 80rpm | ≤0.25A | 55rpm | 1.4kg.cm | ≤0.6A | ≤3kg.cm |
| 350:1 | 9mm | ≤0.065A | 45rpm | ≤0.25A | 31rpm | 2.5kg.cm | ≤0.6A | ≤3kg.cm |
| 500:1 | 9mm | ≤0.065A | 32rpm | ≤0.25A | 22rpm | 3kg.cm | ≤0.6A | ≤3kg.cm |
Note: all reduced no-load speeds have a tolerance of ±15%.
02 / MECHANICAL & ELECTRICAL INTERFACE
03 / DESIGN INTEGRATION
Check the gearbox, output shaft and mounting features. Allow space for terminals, wiring and any rear shaft.
Review the drawings ↓Select the winding for your supply and duty cycle. Check the listed rated and stall currents when choosing the controller.
Compare configurations ↑Define the required speed and torque at the output. Evaluate the selected ratio and motor in the finished mechanism.
Discuss your application ↗ENGINEERING ENQUIRY
Include the winding, gear ratio, target speed and torque, output shaft, duty cycle and expected quantity.