info@nfpmotor.com
Need For Power Electronics Co., Limited · +852 5142 2310
Sonic Vibration Motor 12mm Sonic Vibration Motor – 38mm Type Model NFP-1238-A609

NFP-1238-A609

12mm Sonic Vibration Motor – 38mm Type

Technical information for your next design.

Review the specifications and drawings for the exact configuration. Match the mechanical envelope and operating requirements to your assembly.

Rated voltage
3.6V AC
Weight
Appr. 18g

01 / TECHNICAL REFERENCE

Brushless AC Motor Specifications

Electrical & performance data

Brushless AC Motor Specifications — Electrical & performance data
Rated Voltage 3.6V AC
Rated Current 450mA
Rated Load Torque 4g
Rated Frequency 260Hz
Operating Voltage 3.0V – 4.5V AC
Operating Frequency 170Hz – 350Hz
No Load Frequency 380Hz
No Load Current 200mA
Stall Current 600mA
Equilibrium Position Torque 170gf.cm
Starting Voltage 3.0V AC
Insulation Resistance 10MΩ Min

Mechanical & operating data

Brushless AC Motor Specifications — Mechanical & operating data
Motor Model NFP-1238-A609
Shaft Press Fit Force ≤8kgf
Working Temperature & Humidity -10°C – 60°C; ≤90%RH
Storage Temperature& Humidity -30°C – 70°C; ≤80%RH
Working Life 1,000H
Low Noise 40dB
Weight Appr. 18g

02 / TECHNICAL REFERENCE

BLAC Motor For Health Care Products Outline Drawing

NFP-1238-A09-brushless-vibration-motor-manufacturer

Open full size ↗
NFP-1238-A09-brushless-vibration-motor-manufacturer

03 / TECHNICAL REFERENCE

3.6V AC Small Vibrating Motor Drive Mode

Power supply is supplied alternately in both forward and reverse directions. The power supply frequency is controlled within the range of 170Hz~350Hz. The duty cycle can be controlled according to actual needs.

NFP-1238-A09-ultrasonic-vibration-motor-replacement-motor

Open full size ↗
NFP-1238-A09-ultrasonic-vibration-motor-replacement-motor

04 / TECHNICAL REFERENCE

Low Noise Vibration Motor Characteristics Curve

NFP-1238-A09-miniature-vibration-motors-curve

Open full size ↗
NFP-1238-A09-miniature-vibration-motors-curve

Notice:
1. Because the BLAC motor makes a left-right swing motion, the power-on time in both forward and reverse directions needs to be adjusted to be consistent, so that there will be optimal vibration force and amplitude.
2. Do not supply DC voltage to the motor. At this time, the motor will work in a locked-rotor state, continue to heat up, and will not move. That is, when the motor is not required to vibrate, the power supply at both ends of the motor should be completely cut off.

3.6v ac motor, driving motor for electric toothbrush, electric toothbrush black motors, sonic toothbrush motor, small brushless motors, micro ac motors, alternating current motor, electronic commutation, energy efficiency

ENGINEERING ENQUIRY

Discuss NFP-1238-A609.

Send the model reference, available space, electrical requirements, operating conditions and expected quantity.

Contact NFP Motor ↗