Mechanical fit
Check the gearbox, output shaft and mounting features. Allow space for terminals, wiring and any rear shaft.
Review the drawings ↓NFP-GM12-N20VA-R-1000-1
Compact geared output for your mechanism.
Compare the published winding and gearing configurations. Match the output shaft, operating point and mounting envelope to your assembly.
01 / TECHNICAL DATA
Choose the voltage, winding and reduction ratio together. Values below apply to the listed configurations; original units and tolerances are retained.
| Motor model No. | NFP-N20VA-13110 |
|---|---|
| Voltage | 2.4V DC |
| No-load speed | 14,800rpm |
| No-load current | 60mA |
| At maximum efficiency speed | 12,000rpm |
| At maximum efficiency torque | 2.5g.cm |
| At maximum efficiency current | 200mA |
| Output | 0.31W |
| Stall torque | 13g.cm |
| Stall current | 1.2A |
| Motor model No. | NFP-N20VA-09220 |
|---|---|
| Voltage | 5V DC |
| No-load speed | 14,800rpm |
| No-load current | 30mA |
| At maximum efficiency speed | 12,000rpm |
| At maximum efficiency torque | 2.5g.cm |
| At maximum efficiency current | 120mA |
| Output | 0.31W |
| Stall torque | 13g.cm |
| Stall current | 0.52A |
| Motor model No. | NFP-N20VA-05430 |
|---|---|
| Voltage | 12V DC |
| No-load speed | 16,000rpm |
| No-load current | 15mA |
| At maximum efficiency speed | 12,500rpm |
| At maximum efficiency torque | 3g.cm |
| At maximum efficiency current | 60mA |
| Output | 0.35W |
| Stall torque | 13g.cm |
| Stall current | 0.25A |
| Ratio | Length | No-load speed | Rated speed | Rated torque | Max torque |
|---|---|---|---|---|---|
| 1000:1 | 12mm | 14.5rpm | 12rpm | 1.00kg.cm | 3.0kg.cm |
| Ratio | Length | No-load speed | Rated speed | Rated torque | Max torque |
|---|---|---|---|---|---|
| 1000:1 | 12mm | 14.5rpm | 12rpm | 1.00kg.cm | 3.0kg.cm |
| Ratio | Length | No-load speed | Rated speed | Rated torque | Max torque |
|---|---|---|---|---|---|
| 1000:1 | 12mm | 16rpm | 13rpm | 1.00kg.cm | 3.0kg.cm |
02 / MECHANICAL & ELECTRICAL INTERFACE
03 / DESIGN INTEGRATION
Check the gearbox, output shaft and mounting features. Allow space for terminals, wiring and any rear shaft.
Review the drawings ↓Select the winding for your supply and duty cycle. Check the listed rated and stall currents when choosing the controller.
Compare configurations ↑Define the required speed and torque at the output. Evaluate the selected ratio and motor in the finished mechanism.
Discuss your application ↗ENGINEERING ENQUIRY
Include the winding, gear ratio, target speed and torque, output shaft, duty cycle and expected quantity.