info@nfpmotor.com
Need For Power Electronics Co., Limited · +852 5142 2310
CORELESS / BRUSHLESS DC NFP-D2230RB cylindrical coreless brushless DC motor with output shaft and rear terminals
Ø22 × 30 mm body 62.5 g

NFP-D2230RB / 01A WINDING

22 mm coreless
BLDC motor

Compact rotary drive for servo systems and precision mechanisms.

A 30 mm body length with a 7.4 V nominal winding. Review the operating point, shaft geometry and controller requirements for your assembly.

Nominal voltage
7.4 V
Nominal torque
5.9 mN·m
Nominal speed
14,320 rpm
Maximum efficiency
78 %

01 / TECHNICAL DATA

Specifications at a glance.

Winding 01A

Electrical performance and construction data for the specified motor configuration.

Electrical performance

Electrical performance — 01A winding
Nominal voltage 7.4 V
No-load speed 16,000 rpm
No-load current 220 mA
Nominal speed 14,320 rpm
Nominal torque 5.9 mN·m
Nominal current 1.54 A
Stall torque 56.2 mN·m
Stall current 12.75 A
Maximum efficiency 78%
Terminal resistance 0.58 Ω
Torque constant 4.33 mN·m/A
Speed constant 2,162 rpm/V

Motor & operating limits

Motor construction and operating limits
Model NFP-D2230RB
Motor type Coreless BLDC
Ambient temperature −10 to +40 °C
Maximum winding temperature 80 °C
Maximum permissible speed 30,000 rpm
Pole pairs 1
Weight 62.5 g

02 / MECHANICAL ENVELOPE

Outline drawing.

Open full-size drawing ↗
Ø22 mm body diameter 30 mm body length Ø1.8 mm shaft diameter
NFP-D2230RB outline drawing: 22 mm body diameter, 30 mm body length, 1.8 mm shaft and rear terminal positions
Dimensions in mm. Refer to the drawing for tolerances, mounting holes and terminal positions.

03 / MOTOR CHARACTERISTICS

Performance curve.

Open full-size curve ↗

Speed, current, mechanical output power and efficiency plotted against torque.

NFP-D2230RB performance curve showing speed, output power, efficiency and current as functions of torque
Original published motor curve. Use the specification table for the listed numerical values.

04 / DESIGN INTEGRATION

From motor to mechanism.

01

Mechanical fit

Check the shaft, mounting holes and rear terminal clearance against your assembly. Allow for the complete installed envelope.

Review the drawing ↓
02

Electrical interface

Match the BLDC controller to the motor and supply. Confirm commutation, terminal assignments and any feedback requirements with our team.

Explore motor drivers ↗
03

Load & validation

Define the required speed and torque together with the duty cycle. Evaluate a sample in the finished mechanism under the intended conditions.

Discuss your application ↗

ENGINEERING ENQUIRY

Discuss NFP-D2230RB for your design.

Send the supply voltage, target speed and torque, available space, duty cycle and expected quantity.

Contact NFP Motor ↗