Mechanical fit
Check the gearbox, output shaft and mounting features. Allow space for terminals, wiring and any rear shaft.
Review the drawings ↓NFP-GM12-N20-12V
Compact geared output for your mechanism.
Compare the published winding and gearing configurations. Match the output shaft, operating point and mounting envelope to your assembly.
01 / TECHNICAL DATA
Choose the voltage, winding and reduction ratio together. Values below apply to the listed configurations; original units and tolerances are retained.
| Ratio | No-load Current | No-load Speed | Rated Current | Rated Speed | Rated Torque | Stall Current | Stall Torque |
|---|---|---|---|---|---|---|---|
| 10:1 | ≤30mA | 1500rpm | ≤0.07A | 1200rpm | 20g.cm | ≤0.3A | 0.1kg.cm |
| 20:1 | ≤30mA | 750rpm | ≤0.07A | 600rpm | 40g.cm | ≤0.3A | 0.16kg.cm |
| 30:1 | ≤30mA | 500rpm | ≤0.07A | 400rpm | 60g.cm | ≤0.3A | 0.24kg.cm |
| 50:1 | ≤30mA | 300rpm | ≤0.07A | 240rpm | 100g.cm | ≤0.3A | 0.4kg.cm |
| 100:1 | ≤30mA | 150rpm | ≤0.07A | 120rpm | 200g.cm | ≤0.3A | 0.8kg.cm |
| 150:1 | ≤30mA | 100rpm | ≤0.07A | 80rpm | 300g.cm | ≤0.3A | 1.2kg.cm |
| 210:1 | ≤30mA | 71rpm | ≤0.07A | 57rpm | 400g.cm | ≤0.3A | 1.6kg.cm |
| 298:1 | ≤30mA | 50rpm | ≤0.07A | 40rpm | 600g.cm | ≤0.3A | 2.3kg.cm |
| 380:1 | ≤30mA | 39rpm | ≤0.07A | 31rpm | 750g.cm | ≤0.3A | 3kg.cm |
| 1000:1 | ≤30mA | 15rpm | ≤0.07A | 12rpm | 2000g.cm | ≤0.3A | 3.5kg.cm |
| Ratio | No-load Current | No-load Speed | Rated Current | Rated Speed | Rated Torque | Stall Current | Stall Torque |
|---|---|---|---|---|---|---|---|
| 10:1 | ≤55mA | 2150rpm | ≤0.2A | 1450rpm | 50g.cm | ≤0.5A | 0.13kg.cm |
| 20:1 | ≤55mA | 1075rpm | ≤0.2A | 720rpm | 100g.cm | ≤0.5A | 0.26kg.cm |
| 30:1 | ≤55mA | 717rpm | ≤0.2A | 480rpm | 150g.cm | ≤0.5A | 0.39kg.cm |
| 50:1 | ≤55mA | 430rpm | ≤0.2A | 290rpm | 250g.cm | ≤0.5A | 0.7kg.cm |
| 100:1 | ≤55mA | 215rpm | ≤0.2A | 145rpm | 500g.cm | ≤0.5A | 1.3kg.cm |
| 150:1 | ≤55mA | 143rpm | ≤0.2A | 95rpm | 750g.cm | ≤0.5A | 2kg.cm |
| 210:1 | ≤55mA | 102rpm | ≤0.2A | 70rpm | 1000g.cm | ≤0.5A | 2.7kg.cm |
| 298:1 | ≤55mA | 72rpm | ≤0.2A | 48rpm | 1500g.cm | ≤0.5A | 3kg.cm |
| 380:1 | ≤55mA | 57rpm | ≤0.2A | 38rpm | 1900g.cm | ≤0.5A | 3kg.cm |
| 1000:1 | ≤55mA | 21rpm | ≤0.2A | 14rpm | 3000g.cm | ≤0.5A | 3.5kg.cm |
Note: all reduced no-load speeds have a tolerance of ±15%.
PLEASE NOTE:
02 / MECHANICAL & ELECTRICAL INTERFACE
03 / DESIGN INTEGRATION
Check the gearbox, output shaft and mounting features. Allow space for terminals, wiring and any rear shaft.
Review the drawings ↓Select the winding for your supply and duty cycle. Check the listed rated and stall currents when choosing the controller.
Compare configurations ↑Define the required speed and torque at the output. Evaluate the selected ratio and motor in the finished mechanism.
Discuss your application ↗ENGINEERING ENQUIRY
Include the winding, gear ratio, target speed and torque, output shaft, duty cycle and expected quantity.