Mechanical fit
Check the gearbox, output shaft and mounting features. Allow space for terminals, wiring and any rear shaft.
Review the drawings ↓NFP-GM12-N30
Compact geared output for your mechanism.
Compare the published winding and gearing configurations. Match the output shaft, operating point and mounting envelope to your assembly.
01 / TECHNICAL DATA
Choose the voltage, winding and reduction ratio together. Values below apply to the listed configurations; original units and tolerances are retained.
| Ratio | No-load Current | No-load Speed | Rated Current | Rated Speed | Rated Torque | Stall Current | Stall Torque |
|---|---|---|---|---|---|---|---|
| 10:1 | ≤40mA | 780rpm | ≤0.15A | 390rpm | 80g.cm | ≤0.3A | ≤0.15kg.cm |
| 20:1 | ≤40mA | 390rpm | ≤0.15A | 195rpm | 150g.cm | ≤0.3A | ≤0.3kg.cm |
| 30:1 | ≤40mA | 260rpm | ≤0.15A | 130rpm | 240g.cm | ≤0.3A | ≤0.45kg.cm |
| 50:1 | ≤40mA | 155rpm | ≤0.15A | 78rpm | 400g.cm | ≤0.3A | ≤0.8kg.cm |
| 100:1 | ≤40mA | 77rpm | ≤0.15A | 39rpm | 800g.cm | ≤0.3A | ≤1.5kg.cm |
| 150:1 | ≤40mA | 52rpm | ≤0.15A | 26rpm | 1200g.cm | ≤0.3A | ≤2.3kg.cm |
| 210:1 | ≤40mA | 36rpm | ≤0.15A | 18rpm | 1200g.cm | ≤0.3A | ≤3kg.cm |
| 298:1 | ≤40mA | 26rpm | ≤0.15A | 17rpm | 2000g.cm | ≤0.3A | ≤3kg.cm |
| 380:1 | ≤40mA | 20rpm | ≤0.15A | 16rpm | 2000g.cm | ≤0.3A | ≤3kg.cm |
| Ratio | No-load Current | No-load Speed | Rated Current | Rated Speed | Rated Torque | Stall Current | Stall Torque |
|---|---|---|---|---|---|---|---|
| 10:1 | ≤45mA | 1200rpm | ≤0.25A | 600rpm | 120g.cm | ≤0.5A | ≤0.2kg.cm |
| 20:1 | ≤45mA | 600rpm | ≤0.25A | 300rpm | 220g.cm | ≤0.5A | ≤0.45kg.cm |
| 30:1 | ≤45mA | 400rpm | ≤0.25A | 200rpm | 360g.cm | ≤0.5A | ≤0.6kg.cm |
| 50:1 | ≤45mA | 230rpm | ≤0.25A | 115rpm | 600g.cm | ≤0.5A | ≤1.2kg.cm |
| 100:1 | ≤45mA | 120rpm | ≤0.25A | 60rpm | 1200g.cm | ≤0.5A | ≤2kg.cm |
| 150:1 | ≤45mA | 80rpm | ≤0.25A | 40rpm | 1800g.cm | ≤0.5A | ≤3kg.cm |
| 210:1 | ≤45mA | 57rpm | ≤0.2A | 40rpm | 2000g.cm | ≤0.5A | ≤3kg.cm |
| 298:1 | ≤45mA | 40rpm | ≤0.15A | 35rpm | 2000g.cm | ≤0.5A | ≤3kg.cm |
| 380:1 | ≤45mA | 31rpm | ≤0.1A | 27rpm | 2000g.cm | ≤0.5A | ≤3kg.cm |
| Ratio | No-load Current | No-load Speed | Rated Current | Rated Speed | Rated Torque | Stall Current | Stall Torque |
|---|---|---|---|---|---|---|---|
| 10:1 | ≤65mA | 1600rpm | ≤0.3A | 780rpm | 160g.cm | ≤0.6A | ≤0.3kg.cm |
| 20:1 | ≤65mA | 800rpm | ≤0.3A | 400rpm | 300g.cm | ≤0.6A | ≤0.6kg.cm |
| 30:1 | ≤65mA | 530rpm | ≤0.3A | 260rpm | 480g.cm | ≤0.6A | ≤1kg.cm |
| 50:1 | ≤65mA | 320rpm | ≤0.3A | 160rpm | 800g.cm | ≤0.6A | ≤1.6kg.cm |
| 100:1 | ≤65mA | 160rpm | ≤0.3A | 80rpm | 1600g.cm | ≤0.6A | ≤3kg.cm |
| 150:1 | ≤65mA | 105rpm | ≤0.3A | 50rpm | 2000g.cm | ≤0.6A | ≤3kg.cm |
| 210:1 | ≤65mA | 75rpm | ≤0.3A | 52rpm | 2000g.cm | ≤0.6A | ≤3kg.cm |
| 298:1 | ≤65mA | 53rpm | ≤0.3A | 45rpm | 2000g.cm | ≤0.6A | ≤3kg.cm |
| 380:1 | ≤65mA | 42rpm | ≤0.3A | 35rpm | 2000g.cm | ≤0.6A | ≤3kg.cm |
Note: all reduced no-load speeds have a tolerance of ±15%.
02 / MECHANICAL & ELECTRICAL INTERFACE
03 / DESIGN INTEGRATION
Check the gearbox, output shaft and mounting features. Allow space for terminals, wiring and any rear shaft.
Review the drawings ↓Select the winding for your supply and duty cycle. Check the listed rated and stall currents when choosing the controller.
Compare configurations ↑Define the required speed and torque at the output. Evaluate the selected ratio and motor in the finished mechanism.
Discuss your application ↗ENGINEERING ENQUIRY
Include the winding, gear ratio, target speed and torque, output shaft, duty cycle and expected quantity.