info@nfpmotor.com
Need For Power Electronics Co., Limited · +852 5142 2310
37mm Spur Gear Motor 37mm Metal Gear Motor Model NFP-GM37-3429

NFP-GM37-3429

37mm Metal Gear Motor

Technical information for your next design.

Review the specifications and drawings for the exact configuration. Match the mechanical envelope and operating requirements to your assembly.

01 / TECHNICAL REFERENCE

12V High Performance DC Gear Motor Parameters

Specifications: 12V DC, high power 12W, reversible CW / CCW, speed reduction. Shaft info: 21mm shaft length, of which the length of D-cut is 12mm; 6mm diameter. Appr weight: 190g, various reduction ratios, diverse parameters, and varying weights. Long lifetime: More than 1,000hours

12V High Performance DC Gear Motor Parameters

12V High Performance DC Gear Motor Parameters
Ratio Gearbox Length No-load Current No-load Speed Rated Current Rated Speed Rated Torque Stall Current
6.3:1 19mm ≤0.14A 1150rpm ≤2A 600rpm 1.7kg.cm ≤3.8A
10:1 19mm ≤0.14A 730rpm ≤2A 380rpm 2.7kg.cm ≤3.8A
18.8:1 19mm ≤0.14A 385rpm ≤2A 200rpm 5kg.cm ≤3.8A
30:1 21.5mm ≤0.14A 242rpm ≤2A 125rpm 8kg.cm ≤3.8A
50:1 24mm ≤0.14A 145rpm ≤2A 75rpm 13.5kg.cm ≤3.8A
90:1 24mm ≤0.14A 80rpm ≤2A 42rpm 25kg.cm ≤3.8A
150:1 26.5mm ≤0.14A 48rpm ≤2A 25rpm not allowed stalling ≤3.8A
270:1 26.5mm ≤0.14A 27rpm ≤1.8A 16rpm not allowed stalling ≤3.8A
450:1 29mm ≤0.14A 16rpm ≤1.5A 10rpm not allowed stalling ≤3.8A
650:1 29mm ≤0.14A 11rpm ≤1.2A 8rpm not allowed stalling ≤3.8A
810:1 29mm ≤0.14A 9rpm ≤1A 7rpm not allowed stalling ≤3.8A
Note: all reduced
no-load speeds
have a tolerance of ±15%.

02 / TECHNICAL REFERENCE

High Quality Spur Gear Motor Outline Drawing

3429 brush dc gear motor outline drawing

Open full size ↗
3429 brush dc gear motor outline drawing

Spur gear motors can vary in noise levels depending on factors such as design, quality, load, speed, and lubrication. Higher-quality motors generally operate quieter, but noise can still vary significantly based on environmental conditions and how well-maintained the motor is.

03 / TECHNICAL REFERENCE

DC Brushed Geared Motor Stator Housing Material Comparison

  • Thickness of the galvanized shell is 1mm, thicker than ordinary ones 0.8mm, corrosion resistance.
  • Strong magnetic tiles, strong endurance, strong tightness.
  • High center magnetic force, high temperature resistance.

NFP-GM37-3429-small-gear-motor-meterial

Open full size ↗
NFP-GM37-3429-small-gear-motor-meterial

04 / TECHNICAL REFERENCE

Metal DC Geared Motor Carbon Crystal Structure Size Comparison

  • Integrated plastic end cover base structure for higher precision, ordinary motor is two-piece split end cover base structure.
  • Carbon brush size 2.5 × 3mm, ordinary motor 1.8 × 2.3mm
  • Three times longer wear life.

ENGINEERING ENQUIRY

Discuss NFP-GM37-3429.

Send the model reference, available space, electrical requirements, operating conditions and expected quantity.

Contact NFP Motor ↗