NFP-BL2430-SF
24mm Micro Brushless Vibration Motor – 30mm Type
Technical information for your next design.
Review the specifications and drawings for the exact configuration. Match the mechanical envelope and operating requirements to your assembly.
- Rated voltage
- 12V / 24V DC
- Rated speed
- 3,000rpm / 6,000rpm
- Weight
- About 65g
01 / TECHNICAL REFERENCE
Φ24mm DC Brushless Vibration Motor Parameters
Long lifetime small diameter brushless vibration motor, super big amplitude, low noise. Can work continuously for 30,000 hours. Speed regulation is available.
Technical specifications
| Motor Model | NFP-BL2430-SF |
|---|---|
| Motor Diameter | Φ24mm |
| Motor Total Length | 43mm |
| Rated Voltage | 12V / 24V DC |
Additional specifications
| Rated Speed | 3,000rpm / 6,000rpm |
|---|---|
| Weight | About 65g |
| Rotation | CW / CCW |
Note: all reduced no-load speeds have a tolerance of ±15%.
Features:
-
☞ Fan-shaped vibration head
Large swing head eccentric shaft: All made of high-quality metal materials, with the characteristics of corrosion resistance, not easy to rust, stable transmission ratio, not easy to heat and low noise. -
☞ Pure copper coil
Six-wire winding 100% pure copper wire: Pure copper wire has high resistance accuracy, stable and reliable, faster speed, stronger torque with reducer, small temperature coefficient, and can withstand high temperature. -
☞ High-quality magnetic tile
Good conductivity and long life, high work efficiency and low dynamic loss. Material: sintered NdFeB magnet three-layer treatment, good anti-rust ability, working temperature 80°-200°. -
☞ Built-in brushless drive
Plug and play, stable output: stable and reliable performance, with brushless coil protection board inside, can be forward and reverse rotation, and also with brake, speed regulation and speed measurement wire output.
02 / TECHNICAL REFERENCE
High-frequency Vibration BLDC Motor Outline Drawing
NFP-BL2430-SF bldc motor outline updated
Open full size ↗
03 / TECHNICAL REFERENCE
Long Lifetime Brushless DC Motor Wiring Instruction
Long Lifetime Brushless DC Motor Wiring Instruction
Open full size ↗
Forward / Reverse Rotation Control (without speed
regulation):
2430 Five-wire Motor Wiring Instructions:
- Red Wire: motor power supply positive pole (+) [DC power supply is selected according to motor specifications]
- Black Wire: motor power supply negative pole (-)
- Yellow Wire: FG signal output (for external equipment to detect motor speed, the motor outputs 9 square wave pulses for one circle)
- White Wire: duty cycle speed regulation wire: pulse width speed regulation 15-25KHz [when not regulating speed, connect the white wire together with black wire to power supply negative pole (-), and the motor runs at full speed]
- Orange Wire: forward / reverse rotation [connect the orange wire together with black wire to negative pole (-), the rotation will be reversed], overcurrent protection is 0.8A, automatic protection starts when the instantaneous current exceeds 0.8A, stall protection, the motor will start again after being re-powered.
◆Note
: The positive pole (+) and negative poles
(-) of the motor cannot be connected in reverse!
The yellow wire is the speed signal wire and cannot be connected
to the speed regulator!
Application:
Beauty Instruments, Massagers, Vibrators
ENGINEERING ENQUIRY
Discuss NFP-BL2430-SF.
Send the model reference, available space, electrical requirements, operating conditions and expected quantity.