NFP-BL2418-SF
24mm Small Brushless Vibration Motor – 18mm Type
Technical information for your next design.
Review the specifications and drawings for the exact configuration. Match the mechanical envelope and operating requirements to your assembly.
- Rated voltage
- 12V / 24V DC
- Rated speed
- 4,000rpm / 8,000rpm
- Weight
- About 37g
01 / TECHNICAL REFERENCE
Single Fanshaped Head Vibration BLDC Motor Parameters
Long lifetime small diameter brushless vibration motor, super big amplitude. High-frequency, low noise. Can work continuously for 15,000 hours. Speed regulation is available.
Technical specifications
| Motor Model | NFP-BL2418-SF |
|---|---|
| Motor Diameter | Φ24mm |
| Motor Total Length | 30mm |
| Rated Voltage | 12V / 24V DC |
Additional specifications
| Rated Speed | 4,000rpm / 8,000rpm |
|---|---|
| Weight | About 37g |
| Rotation | CW / CCW |
Note: all reduced no-load speeds have a tolerance of ±15%.
Features:
-
☞ Fan-shaped vibration head
Large swing head eccentric shaft: All made of high-quality metal materials, with the characteristics of corrosion resistance, not easy to rust, stable transmission ratio, not easy to heat and low noise. -
☞ Pure copper coil
Six-wire winding 100% pure copper wire: Pure copper wire has high resistance accuracy, stable and reliable, faster speed, stronger torque with reducer, small temperature coefficient, and can withstand high temperature. -
☞ High-quality magnetic tile
Good conductivity and long life, high work efficiency and low dynamic loss. Material: sintered NdFeB magnet three-layer treatment, good anti-rust ability, working temperature 80°-200°. -
☞ Built-in brushless drive
Plug and play, stable output: stable and reliable performance, with brushless coil protection board inside, can be forward and reverse rotation, and also with brake, speed regulation and speed measurement wire output.
02 / TECHNICAL REFERENCE
Φ24mm DC Brushless Vibration Motors Outline Drawing
Φ24mm DC Brushless Vibration Motors Outline Drawing
Open full size ↗
03 / TECHNICAL REFERENCE
Low Noise Miniature Brushless DC Motor Wiring Instruction
Low Noise Miniature Brushless DC Motor Wiring Instruction
Open full size ↗
Forward / Reverse Rotation Control (without speed
regulation):
2418 Five-wire Motor Wiring Instructions:
- Red Wire: motor power supply positive pole (+) [DC power supply is selected according to motor specifications]
- Black Wire: motor power supply negative pole (-)
- Yellow Wire: FG signal output (for external equipment to detect motor speed, the motor outputs 18 square wave pulses for one circle)
- White Wire: duty cycle speed regulation wire: pulse width speed regulation 15-25KHz [when not regulating speed, connect the white wire together with black wire to power supply negative pole (-), and the motor runs at full speed]
- Orange Wire: forward / reverse rotation [connect the orange wire together with black wire to negative pole (-), the rotation will be reversed], overcurrent protection is 0.8A, automatic protection starts when the instantaneous current exceeds 0.8A, stall protection, the motor will start again after being re-powered.
◆Note
: The positive pole (+) and negative poles
(-) of the motor cannot be connected in reverse!
The yellow wire is the speed signal wire and cannot be connected
to the speed regulator!
Application: Beauty Instruments, Massagers, Vibrators
ENGINEERING ENQUIRY
Discuss NFP-BL2418-SF.
Send the model reference, available space, electrical requirements, operating conditions and expected quantity.