info@nfpmotor.com
Need For Power Electronics Co., Limited · +852 5142 2310
BLDC Cylindrical ERM 24mm Small Brushless Vibration Motor – 18mm Type Model NFP-BL2418-SR

NFP-BL2418-SR

24mm Small Brushless Vibration Motor – 18mm Type

Technical information for your next design.

Review the specifications and drawings for the exact configuration. Match the mechanical envelope and operating requirements to your assembly.

Rated voltage
12V / 24V DC
Rated speed
4,000rpm / 8,000rpm
Weight
About 34g

01 / TECHNICAL REFERENCE

Single Round Head Vibration BLDC Motor Parameters

Long lifetime small diameter brushless vibration motor, super big amplitude. High-frequency, low noise. Can work continuously for 15,000 hours. Speed ​​regulation is available.

Technical specifications

Single Round Head Vibration BLDC Motor Parameters — Technical specifications
Motor Model NFP-BL2418-SR
Motor Diameter Φ24mm
Motor Total Length 30mm
Rated Voltage 12V / 24V DC

Additional specifications

Single Round Head Vibration BLDC Motor Parameters — Additional specifications
Rated Speed 4,000rpm / 8,000rpm
Weight About 34g
Eccentric Diameter 13mm
Rotation CW / CCW
                    Note: all reduced no-load speeds have a tolerance of ±15%.

Features:

  • ☞ Round-shaped vibration head
    Large swing head eccentric shaft: All made of high-quality metal materials, with the characteristics of corrosion resistance, not easy to rust, stable transmission ratio, not easy to heat and low noise.
  • ☞ Pure copper coil
    Six-wire winding 100% pure copper wire: Pure copper wire has high resistance accuracy, stable and reliable, faster speed, stronger torque with reducer, small temperature coefficient, and can withstand high temperature.
  • ☞ High-quality magnetic tile
    Good conductivity and long life, high work efficiency and low dynamic loss. Material: sintered NdFeB magnet three-layer treatment, good anti-rust ability, working temperature 80°-200°.
  • ☞ Built-in brushless drive
    Plug and play, stable output: stable and reliable performance, with brushless coil protection board inside, can be forward and reverse rotation, and also with brake, speed regulation and speed measurement wire output.

02 / TECHNICAL REFERENCE

Φ24mm Brushless DC Vibration Motor Outline Drawing

Φ24mm Brushless DC Vibration Motor Outline Drawing

Open full size ↗
Φ24mm Brushless DC Vibration Motor Outline Drawing

03 / TECHNICAL REFERENCE

Long Lifetime Brushless DC Motor Wiring Instruction

Long Lifetime Brushless DC Motor Wiring Instruction

Open full size ↗
Long Lifetime Brushless DC Motor Wiring Instruction

Forward / Reverse Rotation Control (without speed regulation):

2418 Five-wire Motor Wiring Instructions:

  • Red Wire: motor power supply positive pole (+) [DC power supply is selected according to motor specifications]
  • Black Wire: motor power supply negative pole (-)
  • Yellow Wire: FG signal output (for external equipment to detect motor speed, the motor outputs 18 square wave pulses for one circle)
  • White Wire: duty cycle speed regulation wire: pulse width speed regulation 15-25KHz [when not regulating speed, connect the white wire together with black wire to power supply negative pole (-), and the motor runs at full speed]
  • Orange Wire: forward / reverse rotation [connect the orange wire together with black wire to negative pole (-), the rotation will be reversed], overcurrent protection is 0.8A, automatic protection starts when the instantaneous current exceeds 0.8A, stall protection, the motor will start again after being re-powered.

◆Note : The positive pole (+) and negative poles (-) of the motor cannot be connected in reverse!
The yellow wire is the speed signal wire and cannot be connected to the speed regulator!

Application:
Beauty Instruments, Massagers, Vibrators

ENGINEERING ENQUIRY

Discuss NFP-BL2418-SR.

Send the model reference, available space, electrical requirements, operating conditions and expected quantity.

Contact NFP Motor ↗