info@nfpmotor.com
Need For Power Electronics Co., Limited · +852 5142 2310
BLDC Cylindrical ERM 36mm DC Brushless Vibration Motor – 26mm Type Model NFP-BL3626-SF

NFP-BL3626-SF

36mm DC Brushless Vibration Motor – 26mm Type

Technical information for your next design.

Review the specifications and drawings for the exact configuration. Match the mechanical envelope and operating requirements to your assembly.

Rated voltage
12V / 24V DC
Rated speed
3,000rpm / 6,000rpm
Weight
About 125g

01 / TECHNICAL REFERENCE

Low Noise Vibration Brushless DC Motor Parameters

Long lifetime small diameter brushless vibration motor, super big amplitude, low noise. Can work continuously for 30,000 hours. Speed ​​regulation is available.

Technical specifications

Low Noise Vibration Brushless DC Motor Parameters — Technical specifications
Motor Model NFP-BL3626-SF
Motor Diameter Φ36mm
Motor Total Length 52mm
Rated Voltage 12V / 24V DC

Additional specifications

Low Noise Vibration Brushless DC Motor Parameters — Additional specifications
Rated Speed 3,000rpm / 6,000rpm
Weight About 125g
Eccentric Diameter 33.5mm
Rotation CW / CCW
                    Note: all reduced no-load speeds have a tolerance of ±15%.

Features:

  • ☞ Fan-shaped vibration head
    Large swing head eccentric shaft: All made of high-quality metal materials, with the characteristics of corrosion resistance, not easy to rust, stable transmission ratio, not easy to heat and low noise.
  • ☞ Pure copper coil
    Six-wire winding 100% pure copper wire: Pure copper wire has high resistance accuracy, stable and reliable, faster speed, stronger torque with reducer, small temperature coefficient, and can withstand high temperature.
  • ☞ High-quality magnetic tile
    Good conductivity and long life, high work efficiency and low dynamic loss. Material: sintered NdFeB magnet three-layer treatment, good anti-rust ability, working temperature 80°-200°.
  • ☞ Built-in brushless drive
    Plug and play, stable output: stable and reliable performance, with brushless coil protection board inside, can be forward and reverse rotation, and also with brake, speed regulation and speed measurement wire output.

02 / TECHNICAL REFERENCE

Long Lifetime Brushless Vibration Motor Outline Drawing

Long Lifetime Brushless Vibration Motor Outline Drawing

Open full size ↗
Long Lifetime Brushless Vibration Motor Outline Drawing

03 / TECHNICAL REFERENCE

High-frequency Brushless DC Motor Wiring Instruction

High-frequency Brushless DC Motor Wiring Instruction

Open full size ↗
High-frequency Brushless DC Motor Wiring Instruction

High-frequency Brushless DC Motor Wiring Instruction

Open full size ↗
High-frequency Brushless DC Motor Wiring Instruction

Five-wire Forward / Reverse Rotation Control (without speed regulation):

Six-wire Forward / Reverse Rotation Control (without speed regulation):

3626 Five-wire Motor Wiring Instructions:

  • Red Wire: motor power supply positive pole (+) [DC power supply is selected according to motor specifications]
  • Black Wire: motor power supply negative pole (-)
  • Yellow Wire: FG signal output (for external equipment to detect motor speed, the motor outputs 9 square wave pulses per rotation)
  • White Wire: forward / reverse rotation control: rotation of direction is CCW when the port is not connected; rotation of direction is CW when the port is connected to low level (≤0.6V)
  • Blue Wire: speed ​​regulation control: VSP/PWM speed regulation

3626 Six-wire Motor Wiring Instructions:

  • Red Wire: motor power supply positive pole (+) [DC power supply is selected according to motor specifications]
  • Black Wire: motor power supply negative pole (-)
  • Yellow Wire: FG signal output (for external equipment to detect motor speed, the motor outputs 9 square wave pulses per rotation)
  • White Wire: forward / reverse rotation control: rotation of direction is CCW when the port is not connected; rotation of direction is CW when the port is connected to low level (≤0.6V)
  • Blue Wire: Speed ​​​​regulation control: VSP/PWM speed regulation
  • Green Wire: brake: motor runs when not connected; motor brakes when connected to negative pole (-) (0V)

◆Note : The positive pole (+) and negative poles (-) of the motor cannot be connected in reverse!
The yellow wire is the speed signal wire and cannot be connected to the speed regulator!
The motor forbidden to be running in stall!

Application:
Massage chair, Medical equipment, Smart home, Industrial equipment

ENGINEERING ENQUIRY

Discuss NFP-BL3626-SF.

Send the model reference, available space, electrical requirements, operating conditions and expected quantity.

Contact NFP Motor ↗