info@nfpmotor.com
Need For Power Electronics Co., Limited · +852 5142 2310
BLDC Cylindrical ERM 42mm DC Brushless Vibration Motor – 60mm Type Model NFP-BL4260-SF

NFP-BL4260-SF

42mm DC Brushless Vibration Motor – 60mm Type

Technical information for your next design.

Review the specifications and drawings for the exact configuration. Match the mechanical envelope and operating requirements to your assembly.

Rated voltage
12V / 24V DC
Rated speed
2,500rpm – 5,000rpm
Weight
About 360g

01 / TECHNICAL REFERENCE

Long Lifetime Vibration BLDC Motor Parameters

Long lifetime small diameter brushless vibration motor, super big amplitude, low noise. Can work continuously for 30,000 hours. Speed ​​regulation is available.

Technical specifications

Long Lifetime Vibration BLDC Motor Parameters — Technical specifications
Motor Model NFP-BL4260-SF
Motor Diameter Φ42mm
Motor Total Length 95mm
Rated Voltage 12V / 24V DC

Additional specifications

Long Lifetime Vibration BLDC Motor Parameters — Additional specifications
Rated Speed 2,500rpm – 5,000rpm
Weight About 360g
Eccentric Diameter 39.5mm
Rotation CW / CCW
                    Note: all reduced no-load speeds have a tolerance of ±15%.

Features:

  • ☞ Fan-shaped vibration head
    Large swing head eccentric shaft: All made of high-quality metal materials, with the characteristics of corrosion resistance, not easy to rust, stable transmission ratio, not easy to heat and low noise.
  • ☞ Pure copper coil
    Six-wire winding 100% pure copper wire: Pure copper wire has high resistance accuracy, stable and reliable, faster speed, stronger torque with reducer, small temperature coefficient, and can withstand high temperature.
  • ☞ High-quality magnetic tile
    Good conductivity and long life, high work efficiency and low dynamic loss. Material: sintered NdFeB magnet three-layer treatment, good anti-rust ability, working temperature 80°-200°.
  • ☞ Built-in brushless drive
    Plug and play, stable output: stable and reliable performance, with brushless coil protection board inside, can be forward and reverse rotation, and also with brake, speed regulation and speed measurement wire output.

02 / TECHNICAL REFERENCE

Φ42mm Brushless Vibration Motor Outline Drawing

NFP-BL4260-SF brushless dc motor outline longlife time

Open full size ↗
NFP-BL4260-SF brushless dc motor outline longlife time

03 / TECHNICAL REFERENCE

High-frequency Brushless DC Motor Wiring Instruction

High-frequency Brushless DC Motor Wiring Instruction

Open full size ↗
High-frequency Brushless DC Motor Wiring Instruction

Forward / Reverse Rotation Control (without speed regulation):

4260 Six-wire Motor Wiring Instructions:

  • Red Wire: motor power supply positive pole (+) (DC10V-27V)
  • Black Wire: motor power supply negative pole (-)
  • Yellow Wire: FG signal output (for external equipment to detect motor speed, four-pole magnetic ring motor outputs 12 square wave pulses per rotation)
  • White Wire: motor forward / reverse rotation control: rotation of direction is CCW when the port is not connected; rotation of direction is CW when the port is connected to low level (≤0.6V)
  • Blue Wire: speed regulation control: speed regulation through PWM mode (duty cycle); the motor runs at full speed when blue wire connected to power supply negative pole (-) (0V)
  • Green Wire: brake: motor runs when not connected; motor brakes when connected to negative pole (-) (0V)

◆Note : The positive pole (+) and negative poles (-) of the motor cannot be connected in reverse!
The yellow wire is the speed signal wire and cannot be connected to the speed regulator!
The motor forbidden to be running in stall!

Application:
Massage chair, Medical equipment, Smart home, Industrial equipment

ENGINEERING ENQUIRY

Discuss NFP-BL4260-SF.

Send the model reference, available space, electrical requirements, operating conditions and expected quantity.

Contact NFP Motor ↗