info@nfpmotor.com
Need For Power Electronics Co., Limited · +852 5142 2310
Enclosed Vibration Motor 7mm Encapsulated Vibration Motor – 24mm Type Model NFP-E0716M

NFP-E0716M

7mm Encapsulated Vibration Motor – 24mm Type

Technical information for your next design.

Review the specifications and drawings for the exact configuration. Match the mechanical envelope and operating requirements to your assembly.

Rated voltage
3V DC/ 3.7V DC
Rated speed
14,500RPM or 16,500rpm

01 / TECHNICAL REFERENCE

NFP-E0716M Enclosed Vibration Motor Metal Case

This metal capsule encapsulated vibration motor can be used for vibration alerting.

High efficiency | Low energy consumption | Low noise | Small size | Strong sealing | Fast response | Low starting current | Long lifetime

Electrical & performance data

NFP-E0716M Enclosed Vibration Motor Metal Case — Electrical & performance data
Rated Voltage: 3V DC/ 3.7V DC
Start Voltage: 1.0V max
Rated Current: 300mA max
Stall Current: 850mA max
Rated Speed: 14,500RPM or 16,500rpm
Terminal Resistance: 5.6Ω ± 25%
Nominal Amplitude Vibe Force: 5.10G

Mechanical & operating data

NFP-E0716M Enclosed Vibration Motor Metal Case — Mechanical & operating data
Motor Model: NFP-E0716M
Body Diameter: 7.5mm
Body Length: 24mm ± 0.3mm
Motor Diameter: 7mm
Motor Length: 16.6mm
Ecc. Weight Radius: 2.7mm ± 0.1mm
Ecc. Weight Length: 5.0mm
Shaft End Play: 0.05mm – 0.3mm
Wire Gauge: 30AWG UL1571
Wire Length: 100mm

02 / TECHNICAL REFERENCE

Overmoldable Vibration Motors Ouline Drawing

Small powerful motors NFP-E0716M is used in Mi Electric Toothbrush. Vibration makes toothbrushes more efficient to use. Also can be used in other applications. Contact us for a quotation for production quantities, customizations and integration.

NFP-E0716-small-vibration-device-outline-drawing

Open full size ↗
NFP-E0716-small-vibration-device-outline-drawing

03 / TECHNICAL REFERENCE

Encapsulated Vibration Mass Production

enclosed-vibration-motors-mass-production

Open full size ↗
enclosed-vibration-motors-mass-production

04 / TECHNICAL REFERENCE

7mm Vibration Motors Applications

small-vibration-motor-NFP-E0716M-used-for-real-time-group-monitor-firehud

Open full size ↗
small-vibration-motor-NFP-E0716M-used-for-real-time-group-monitor-firehud

05 / TECHNICAL REFERENCE

Operating Temperature of a Standard Coreless Vibration Motor

The operating temperature of a coreless motor (ironless motor) depends on several factors, including the type of internal magnetic material, winding material, load conditions, and operating environment.

General Operating Temperature Range:
– Recommended Operating Temperature: -10°C to 60°C
– Maximum Operating Temperature: -20°C to 80°C (performance may be affected)

Impact of Temperature on Magnets:
Most coreless motors use neodymium (NdFeB) magnets , whose magnetic properties weaken as temperature increases, affecting motor efficiency and output performance:
– Below 60°C: Minimal impact, magnetic properties remain stable.
– Above 80°C: Magnetic strength starts to weaken, reducing motor torque.
– Above 150°C: Standard neodymium magnets may suffer irreversible demagnetization, leading to performance degradation or motor failure.

How to Prevent High-Temperature Issues:
1. Reduce Continuous Load – Avoid running the motor at full load for long periods to prevent overheating.
2. Optimize Heat Dissipation – Ensure proper ventilation or use heat sinks to maintain a stable operating temperature.
3. Use High-Temperature Magnets – For applications requiring higher temperatures, consider Samarium Cobalt (SmCo) magnets, which can withstand up to 250°C.
4. Adjust Driving Voltage – Avoid excessive voltage, which can overheat the windings and shorten motor lifespan.

If your application requires extended operation in high-temperature environments , it is recommended to consider above points to ensure stability and longevity.

ENGINEERING ENQUIRY

Discuss NFP-E0716M.

Send the model reference, available space, electrical requirements, operating conditions and expected quantity.

Contact NFP Motor ↗