info@nfpmotor.com
Need For Power Electronics Co., Limited · +852 5142 2310
KH SERIES / LINEAR ACTUATOR Illustrative render
Illustrative product rendering based on the GB06-47-MD22001-1-M assembly drawing
6 mm body / gearbox Source page 09 / 41

GB06-47-MD22001-1-M

6 mm Linear Gearbox Actuator

Compact motion. Precisely geared.

A 3 V linear gearbox assembly with a 5 mm/s no-load travel speed and a rated load of at least 500 gf.

Rated voltage
3.0 V DC
No-load speed
5 mm/s
Rated load
≥500 gf
Motor speed
24000–31000 rpm

Part / series no. GB06-47-MD22001-1-M

01 / TECHNICAL DATA

Specifications at a glance.

Electrical performance, construction and operating data for the specified configuration or motor family.

Electrical & drive

Electrical & drive
Rated voltage 3.0 V DC
No-load current ≤40 mA
Stall current 170 mA (reference)

Mechanical & operating data

Mechanical & operating data
Operating temperature −20 to +50 °C
No-load linear speed 5 mm/s
Rated load ≥500 gf
Motor speed 24000–31000 rpm
Gearbox diameter 6.0 ±0.12 mm
Motor diameter 6.0 ±0.2 mm
Gearbox length 12.0 mm
Motor length 9.3 ±0.2 mm
Lead length 40 ±3 mm
Retracted position dimension 5.4 +0.5/0 mm
Technical notes
  • General dimensional tolerances (GB/T1804): under 3 mm ±0.05 mm; 3–6 mm ±0.05 mm; 6–20 mm ±0.1 mm; above 20 mm ±0.15 mm.
  • 30 AWG leads: blue B−, red B+; JST SH1.25 mm 2P connector.
  • The source table labels the ≥500 gf load as rated torque; gf is retained as the source load unit.

02 / MECHANICAL REFERENCE

Dimensions & assembly layout.

English drawing labels with original dimensions and tolerances. Open the image to inspect the full drawing.

Outline drawing Unit: mm
GB06-47-MD22001-1-M outline dimensions and assembly geometry
Outline drawing · Dimensions and tolerances retained from source drawing.
Assembly perspective Unit: mm
GB06-47-MD22001-1-M Assembly perspective
Assembly perspective · Dimensions and tolerances retained from source drawing.

04 / DESIGN INTEGRATION

From drawing to your mechanism.

01 / FIT

Confirm the envelope.

Review the gearbox dimensions, mounting interface, shaft geometry and connection clearance in the outline drawing.

Review dimensions ↑
02 / SELECT

Match the operating point.

Specify the supply voltage, speed, torque and duty cycle. Use the complete part code when selecting a configuration.

Review original data ↗
03 / VALIDATE

Evaluate in your assembly.

Check start-up behavior, load, clearances and operating temperature in the intended mechanism.

Discuss your application ↗

ENGINEERING ENQUIRY

Discuss this drive for your design.

Send your operating requirements and expected quantity. Reference GB06-47-MD22001-1-M.

Contact NFP Motor ↗
Technical source FORWA / KH catalogue · Page 9 · GB06-47-MD22001-1-M Download source PDF ↓

Product image: AI-generated illustrative render based on the assembly drawing. Exact dimensions and variant details follow the technical drawing and specification tables.