info@nfpmotor.com
Need For Power Electronics Co., Limited · +852 5142 2310
KH SERIES / DC GEAR MOTOR Illustrative render
Illustrative product rendering based on the GB10-171-MD17001-4-M3.0 assembly drawing
10 mm body / gearbox Source page 13 / 41

GB10-171-MD17001-4-M3.0

10 mm 171:1 Planetary DC Gearmotor – Flange Mount Cross Output

Compact motion. Precisely geared.

A 3 V DC gearmotor with a 10 mm planetary gearbox, 171:1 transmission ratio and flange mount cross output.

Transmission ratio
171:1
Rated voltage
3.0 V DC
Rated speed
43 ±10% rpm
Rated torque
110 g·cm

Part / series no. GB10-171-MD17001-4-M3.0

01 / TECHNICAL DATA

Specifications at a glance.

171:1

Electrical performance, construction and operating data for the specified configuration or motor family.

Electrical & drive

Electrical & drive
Rated voltage 3.0 V DC
No-load current ≤60 mA
Rated current 100 mA
Stall current 140 mA

Mechanical & operating data

Mechanical & operating data
Operating temperature −20 to +50 °C
No-load speed 63 ±10% rpm
Rated torque 110 g·cm
Rated speed 43 ±10% rpm
Stall torque 400 g·cm
Direction of rotation CW / CCW
Noise ≤48 dB
Axial play 0.2 mm max
Body diameter 10.0 ±0.05 mm
Front assembly length 10 ±0.1 mm
Cross output width 3.88 ±0.05 mm
Cross arm thickness 1.5 +0/−0.05 mm
Mounting hole spacing 14.0 mm
Mounting hole diameter 1.8 mm
Gearbox housing length 7 ±0.1 mm
Motor length 12.2 mm
Technical notes
  • Noise is measured 10 cm from the gearbox with an ambient noise level of 31 dB.
  • General dimensional tolerances (GB/T1804): under 3 mm ±0.05 mm; 3–6 mm ±0.05 mm; 6–20 mm ±0.1 mm; above 20 mm ±0.15 mm.

02 / MECHANICAL REFERENCE

Dimensions & assembly layout.

English drawing labels with original dimensions and tolerances. Open the image to inspect the full drawing.

Outline drawing Unit: mm
GB10-171-MD17001-4-M3.0 outline dimensions and assembly geometry
Outline drawing · Dimensions and tolerances retained from source drawing.

04 / DESIGN INTEGRATION

From drawing to your mechanism.

01 / FIT

Confirm the envelope.

Review the gearbox dimensions, mounting interface, shaft geometry and connection clearance in the outline drawing.

Review dimensions ↑
02 / SELECT

Match the operating point.

Specify the supply voltage, speed, torque and duty cycle. Use the complete part code when selecting a configuration.

Review original data ↗
03 / VALIDATE

Evaluate in your assembly.

Check start-up behavior, load, clearances and operating temperature in the intended mechanism.

Discuss your application ↗

ENGINEERING ENQUIRY

Discuss this drive for your design.

Send your operating requirements and expected quantity. Reference GB10-171-MD17001-4-M3.0.

Contact NFP Motor ↗
Technical source FORWA / KH catalogue · Page 13 · GB10-171-MD17001-4-M3.0 Download source PDF ↓

Product image: AI-generated illustrative render based on the assembly drawing. Exact dimensions and variant details follow the technical drawing and specification tables.