info@nfpmotor.com
Need For Power Electronics Co., Limited · +852 5142 2310
KH SERIES / DC GEAR MOTOR Illustrative render
Illustrative product rendering based on the GB28-22-WM17003-1-M assembly drawing
28 mm body / gearbox Source page 35 / 41

GB28-22-WM17003-1-M

28 mm 22:1 DC planetary gearmotor

Compact motion. Precisely geared.

28 mm planetary gearbox with a 22:1 transmission ratio.

Rated voltage
12.0 V DC
Operating temperature
−30 to +80 °C
No-load speed
440±10% rpm
No-load current
≤1.2 A

Part / series no. GB28-22-WM17003-1-M

01 / TECHNICAL DATA

Specifications at a glance.

22:1

Electrical performance, construction and operating data for the specified configuration or motor family.

Electrical & drive

Electrical & drive
Rated voltage 12.0 V DC
No-load current ≤1.2 A
Rated current 4 A
Stall current 27 A

Mechanical & operating data

Mechanical & operating data
Operating temperature −30 to +80 °C
No-load speed 440±10% rpm
Rated torque 475 mN·m
Rated speed 404±10% rpm
Stall torque 47 kg·cm
Direction CW/CCW
Noise ≤50 dB
Axial gap 0.2 mm max
Gearbox length 32.1 mm
Motor length 53.0 mm
Spline standard ISO 4156
Spline tooth profile Involute
Spline module m 0.3
Spline pressure angle α 30°
Spline tooth count z 21
Spline profile-shift coefficient x +0
Spline pitch diameter d₀ Ø6.30 mm
Spline major diameter dₐ Ø6.75 +0.1/−0 mm
Spline minor diameter d_f Ø6.03 +0.12/−0 mm
Span tooth count Zm 4
Span thickness Sm 3.185 +0.05/−0 mm
Spline tooth-profile accuracy grade / (not specified)
Technical notes
  • Maximum allowable torque: 15 kg·cm.
  • Instantaneous allowable torque: 36 kg·cm.
  • Backlash: ≤3°.
  • Output shaft radial load: ≤50 N.
  • Noise measured 30 cm from the gearbox; background noise 31 dB.
  • General dimensional tolerances, GB/T 1804: under 3 mm ±0.05 mm; 3–6 mm ±0.05 mm; 6–20 mm ±0.1 mm; above 20 mm ±0.15 mm.

02 / MECHANICAL REFERENCE

Dimensions & assembly layout.

English drawing labels with original dimensions and tolerances. Open the image to inspect the full drawing.

Outline drawing Unit: mm
GB28-22-WM17003-1-M outline dimensions and assembly geometry
Outline drawing · Dimensions and tolerances retained from source drawing.

04 / DESIGN INTEGRATION

From drawing to your mechanism.

01 / FIT

Confirm the envelope.

Review the gearbox dimensions, mounting interface, shaft geometry and connection clearance in the outline drawing.

Review dimensions ↑
02 / SELECT

Match the operating point.

Specify the supply voltage, speed, torque and duty cycle. Use the complete part code when selecting a configuration.

Review original data ↗
03 / VALIDATE

Evaluate in your assembly.

Check start-up behavior, load, clearances and operating temperature in the intended mechanism.

Discuss your application ↗

ENGINEERING ENQUIRY

Discuss this drive for your design.

Send your operating requirements and expected quantity. Reference GB28-22-WM17003-1-M.

Contact NFP Motor ↗
Technical source FORWA / KH catalogue · Page 35 · GB28-22-WM17003-1-M Download source PDF ↓

Product image: AI-generated illustrative render based on the assembly drawing. Exact dimensions and variant details follow the technical drawing and specification tables.