info@nfpmotor.com
Need For Power Electronics Co., Limited · +852 5142 2310
KH SERIES / DC GEAR MOTOR Illustrative render
Illustrative product rendering based on the GBCL-420-DZ23009-M assembly drawing
32 mm wide gearbox body / gearbox Source page 41 / 41

GBCL-420-DZ23009-M

GBCL rectangular DC gearmotor

Compact motion. Precisely geared.

Rectangular gearbox with a 3.7 V DC motor.

Rated voltage
3.7 V DC
Operating temperature
−10 to +60 °C
No-load speed
23±3 rpm
No-load current
≤450 mA

Part / series no. GBCL-420-DZ23009-M

01 / TECHNICAL DATA

Specifications at a glance.

Not separately specified

Electrical performance, construction and operating data for the specified configuration or motor family.

Electrical & drive

Electrical & drive
Rated voltage 3.7 V DC
No-load current ≤450 mA
Rated current 1.3 A max
Stall current 8 A max

Mechanical & operating data

Mechanical & operating data
Operating temperature −10 to +60 °C
No-load speed 23±3 rpm
Rated torque 550 mN·m
Rated speed 20±2 rpm
Stall torque 4 N·m min
Direction CW/CCW
Noise 50 dB max
Axial gap 0.05–0.3 mm
Gearbox footprint 58.84±0.2 × 32.0±0.2 mm
Gearbox height 20.0±0.2 mm
Motor diameter Ø24.2 mm (reference)
Motor length 31.8 mm (reference)
Output shaft diameter Ø6.0 +0/−0.06 mm
Technical notes
  • Noise measured 30 cm from the gearbox; background noise 31 dB.
  • Four M3 mounting holes: effective depth 4.0 mm; breakthrough is not permitted.
  • Output shaft internal M3 thread: effective depth 6.0 mm.
  • The source drawing does not separately state the transmission ratio.
  • General dimensional tolerances, GB/T 1804: under 3 mm ±0.05 mm; 3–6 mm ±0.05 mm; 6–20 mm ±0.1 mm; above 20 mm ±0.15 mm.

02 / MECHANICAL REFERENCE

Dimensions & assembly layout.

English drawing labels with original dimensions and tolerances. Open the image to inspect the full drawing.

Outline drawing Unit: mm
GBCL-420-DZ23009-M outline dimensions and assembly geometry
Outline drawing · Dimensions and tolerances retained from source drawing.

04 / DESIGN INTEGRATION

From drawing to your mechanism.

01 / FIT

Confirm the envelope.

Review the gearbox dimensions, mounting interface, shaft geometry and connection clearance in the outline drawing.

Review dimensions ↑
02 / SELECT

Match the operating point.

Specify the supply voltage, speed, torque and duty cycle. Use the complete part code when selecting a configuration.

Review original data ↗
03 / VALIDATE

Evaluate in your assembly.

Check start-up behavior, load, clearances and operating temperature in the intended mechanism.

Discuss your application ↗

ENGINEERING ENQUIRY

Discuss this drive for your design.

Send your operating requirements and expected quantity. Reference GBCL-420-DZ23009-M.

Contact NFP Motor ↗
Technical source FORWA / KH catalogue · Page 41 · GBCL-420-DZ23009-M Download source PDF ↓

Product image: AI-generated illustrative render based on the assembly drawing. Exact dimensions and variant details follow the technical drawing and specification tables.