info@nfpmotor.com
Need For Power Electronics Co., Limited · +852 5142 2310
Linear Vibration Motor 11mm x 14mm Rectangular Linear Vibration Motor Model NFP-ELV1411A

NFP-ELV1411A

11mm x 14mm Rectangular Linear Vibration Motor

Technical information for your next design.

Review the specifications and drawings for the exact configuration. Match the mechanical envelope and operating requirements to your assembly.

Rated voltage
AC 2.0Vrms
Body size
14mm x 11mm x 2.5mm

01 / TECHNICAL REFERENCE

LVM-Series AAC Linear Vibration Motors NFP-ELV1411A Performance

They are an excellent alternative to brushless vibration motors as the only internal parts that are subjected to wear / failure are the springs. Unlike conventional brushed DC vibration motors, linear resonant actuators must be driven by an AC signal at the devices resonant frequency. A number of companies make IC drivers for linear vibration motors that supply the correct drive signals and contain a library of haptic effects you can choose from.

Technical specifications

LVM-Series AAC Linear Vibration Motors NFP-ELV1411A Performance — Technical specifications
LRA features: Linear Vibration Motor Applications:
Long lifetime cycles Wearable devices
Consistent resonant frequency Any lightweight device requiring a silent alert or haptic feedback

Additional specifications

LVM-Series AAC Linear Vibration Motors NFP-ELV1411A Performance — Additional specifications
Custom FPC and SMD connection methods are possible Alerting for dangerous condition
Superior rise and fall times Taptic feedback handle devices

02 / TECHNICAL REFERENCE

Haptic Feedback Vibration Motor Data Sheet

Electrical & performance data

Haptic Feedback Vibration Motor Data Sheet — Electrical & performance data
Rated voltage: AC 2.0Vrms
Vibration amplitude: 1.5Grms @100g
Motor frequency: 150Hz
Nominal Operating current: 90max
Terminal Resistance: 26+/-10%

Mechanical & operating data

Haptic Feedback Vibration Motor Data Sheet — Mechanical & operating data
Motor model: NFP-ELV1411A
Motor Weight 2.5g
Size: 14mm x 11mm x 2.5mm
Mechanical Noise: 50dB max
Operating Temperature Range: -30~+70
Storage Temperature Range: -40~+80

03 / TECHNICAL REFERENCE

X-Axis Linear Vibration Motor Applications

Sunu Band is the latest wearable technology and mobility aid for people who are blind and visually impaired. The Sunu Band S uses the LVM series Linear Vibration motors to provide haptic feedback via vibration pulses that are sensed on the user’s wrist. The haptic communication of the Sunu Band provides increased awareness and perception in order to improve mobility, orientation or direction information, navigation and time-telling, learn more…

lvm-linear-vibration-motor-elv1411a

Open full size ↗
lvm-linear-vibration-motor-elv1411a

Reflow Temperature Suggest: The typical reflow temperature for NFP-ELV1411A is range for Pb-Free (Sn/Ag) solder is 240-250°C with 40-80 seconds over 220°C. It should be noted that the recommended Sn/Pb reflow temperature range are less critical, and that minor deviations in temperature of equipment and components generally do not create soldering problems.

How to drive the vibrator? Or available standard part to drive it from the market:
TI is one such company that makes LRA drivers IC’s. TI makes and evaluation board that incorporates the TI DRV2605L haptic driver IC. It should be noted that unlike brushed ERM vibration motors, varying the amplitude of the applied voltage will only change the amplitude of the vibration force, not the frequency of vibration.
TI chip ? https://www.ti.com/motor-drivers/products.html Search “DRV26” you will get a series of linear vibration motors driving IC.
AWINIC chip AW8695FCR ? https://www.awinic.com/en/index/pageview/catid/35/id/5.html

04 / TECHNICAL REFERENCE

Linear Vibration Motors ELV-1411A DRV2605 Driver Kit

LRA-NFP-ELV-1411-linear-resonant-actuator-driver

Open full size ↗
LRA-NFP-ELV-1411-linear-resonant-actuator-driver

05 / TECHNICAL REFERENCE

Short Introduction Of LVM-Series Linear Vibration Motors

Due to their fast rise and fall times and superior braking ability, NFP’s linear resonant actuators (LRA) vibration motors are an excellent choice for haptic applications. Their relatively simple internal construction also offers high reliability and exceptionally long life when compared with brushed ERM motors. NFP’s LRA’s have an internal mass that oscillates back and forth along the X-axis at its resonant frequency.

lra-linear-resonant-actuators-NFP-ELV-1411A-SMT

Open full size ↗
lra-linear-resonant-actuators-NFP-ELV-1411A-SMT

lra-linear-resonant-actuator-lvm-nfp-elv1411a

Open full size ↗
lra-linear-resonant-actuator-lvm-nfp-elv1411a

06 / TECHNICAL REFERENCE

AAC Technologies ELV1411A X Direction Linear Vibrator Used For Nokia’s Lumia 800

The frequency of vibration is fixed at the LRA’s resonant frequency which in the case of our 2 LRA’s is either 180 or 200 hz. Due the LRA’s Hi-Q , applying a frequency above or below the resonant frequency of the LRA will result in the LRA producing a lower vibration amplitude or if far from the resonant frequency, none at all.

LRA-nokia-lumia-800-linear-actuator-with-feedback-haptic-motor

Open full size ↗
LRA-nokia-lumia-800-linear-actuator-with-feedback-haptic-motor

ENGINEERING ENQUIRY

Discuss NFP-ELV1411A.

Send the model reference, available space, electrical requirements, operating conditions and expected quantity.

Contact NFP Motor ↗