info@nfpmotor.com
Need For Power Electronics Co., Limited · +852 5142 2310
Motor Drive Controller 25A 6V-50V 300W Sensorless Brushless DC Motor Driver Speed Controller NFP-BL50V300W

NFP-BL50V300W

25A 6V-50V 300W Sensorless Brushless DC Motor Driver Speed Controller NFP-BL50V300W

Technical information for your next design.

Review the specifications and drawings for the exact configuration. Match the mechanical envelope and operating requirements to your assembly.

01 / TECHNICAL REFERENCE

3-phase Brushless DC Motor Controller Technical Sheet

BL50V300 non-inductive brushless motor driver is a high performance driver developed for Hall-free DC brushless three-phase motors with wide voltage and high current, featuring simple peripheral circuits, perfect functions, simple debugging, high driving efficiency, flexible application and wide applicability, etc.

It only needs to be connected to the three-phase motor wires (UVW), and then can be realized as a motor control.

Technical specifications

3-phase Brushless DC Motor Controller Technical Sheet — Technical specifications
Driver Model NFP-BL50V300W
Driver Type 3 phases brushless type
Operating Voltage 6V - 50V DC
Control Way 0-5V / PWM
Current 25A
Power 300W
Peak Current 35A
Rated Current (12V DC) 25A
Rated Current (24V DC) 12A

Additional specifications

3-phase Brushless DC Motor Controller Technical Sheet — Additional specifications
Max Speed 80,000rpm
Rotation CW / CCW
Hall No
Stall Protection Yes
High Temperature Protection Yes
Overcurrent Protection Yes
Stop/Brake Function Yes
MCU control Yes

02 / TECHNICAL REFERENCE

Low Voltage PWM Brushless Controller Outline Drawing

Application areas: drone motors, water pumps, oil pumps, air pumps, power tools, small compressors, vacuum cleaners, storm fans, propellers, etc.

NFP-BL50V300W-bldc-motor-speed-controller-dimension

Open full size ↗
NFP-BL50V300W-bldc-motor-speed-controller-dimension

03 / TECHNICAL REFERENCE

High Power BLDC Motor Driver Functionalities

High Power BLDC Motor Driver Functionalities

High Power BLDC Motor Driver Functionalities
Label Description
Stop Default is high level (5V). Connect to GND to stop.
Brake Default is high level (5V). Connect to GND for an instantaneous stop.
Direction Default is high level. Connect to GND for reverse rotation.
0-5V / PWM Default is 0-5V speed control. 0V stops the motor; 5V is the maximum speed. Use a button to switch to PWM speed control. PWM frequency should be 1-10 kHz, with an amplitude of 3.3-5V.
5V Outputs a 5V voltage, with approximately 100mA current, for powering external devices.

NFP-BL50V300W-bldc-brushless-motor-controller

Open full size ↗
NFP-BL50V300W-bldc-brushless-motor-controller

04 / TECHNICAL REFERENCE

Sensorless Motor Driver External Potentiometer for Speed Adjustment

NFP-BL50V300W-sensorless-BLDC-motor

Open full size ↗
NFP-BL50V300W-sensorless-BLDC-motor

Sensorless BLDC motor using an external potentiometer for finer control.

05 / TECHNICAL REFERENCE

Sensorless Electric Motor External PWM Speed Control

NFP-BL50V300W-sensorless-brushless-gear-motor-controller

Open full size ↗
NFP-BL50V300W-sensorless-brushless-gear-motor-controller

06 / TECHNICAL REFERENCE

Sensorless BLDC Motor Onboard Potentiometer Speed Control

Button Operation Instructions:
The button is used to switch between speed control modes. The default mode is 0-5V speed control (via potentiometer).

Switch to PWM Mode:

  • Press the button once briefly.
  • The indicator light on the board will blink three times.
  • This switches to PWM speed control mode, which takes effect immediately and saves the setting.
  • The setting will persist even after power cycling.

Switch Back to 0-5V Mode:

  • Press the button once again briefly.
  • The indicator light will blink once.
  • This switches back to 0-5V speed control mode, which also takes effect immediately and saves the setting.

NFP-BL50V300W-sensorless-bldc-motor-onboard-potentiometer-speed-control

Open full size ↗
NFP-BL50V300W-sensorless-bldc-motor-onboard-potentiometer-speed-control

07 / TECHNICAL REFERENCE

Sensorless Brushless Motor Control Board Wiring Diagram

NFP-BL50V300W-sensorless-brushless-dc-motor-driver

Open full size ↗
NFP-BL50V300W-sensorless-brushless-dc-motor-driver

⚠️NOTE:

  • Before using, confirm the motor’s voltage and power specifications to ensure they are within the module’s specified range.
  • Connect the wires first, then power on.
  • The module does not have reverse polarity protection. Reversing the power connection will cause permanent damage (be cautious).
  • The power supply’s wattage must exceed the motor’s power requirements. For example, for a motor with a rated power of 100W, choose a power supply greater than 100W.
  • Power calculation method:
    Power = Voltage × Current. For example, if the motor’s rated power is 100W and the rated operating voltage is 12V:
    Calculated rated current = 100 ÷ 12 = 8.3A. Therefore, the power supply’s current cannot be less than 8.3A.

ENGINEERING ENQUIRY

Discuss NFP-BL50V300W.

Send the model reference, available space, electrical requirements, operating conditions and expected quantity.

Contact NFP Motor ↗