NFP-GM25-25BY
25mm Stepper Metal Gear Motor
Technical information for your next design.
Review the specifications and drawings for the exact configuration. Match the mechanical envelope and operating requirements to your assembly.
- Rated voltage
- 12V DC
- Weight
- 75g
01 / TECHNICAL REFERENCE
Brushless DC Gear Motors Stepper Type Data Sheet
The 25mm Stepper Metal Gear Motor (Model NFP-GM25-25BY) is designed for high precision and reliable performance in various applications. This stepper motor features a robust construction with metal gears, ensuring durability and efficiency. With its quiet operation and precise positioning, it is ideal for applications that require accurate control and low noise.
Electrical & performance data
| Rated Voltage | 12V DC |
|---|---|
| Phase Resistance | 10Ω |
| Step Angle | 15° |
| Phases Number | 2 phases |
| Frequency Range | 100pps – 1,300pps |
| Coil Resistance | 10+7% Ohm/Phase |
| Drive Mode | Bipolar Drive |
| Pull-out Torque | ≥60gf.cm at 100pps |
| Holding Torque | ≥75gf.cm at 0pps |
| Coil Inductance | 7.5mH/Phase |
| Current Per Phase | 300mA/Phase |
| Max Response Frequency | ≥1,300pps |
| Max Starting Frequency | ≥800pps |
| Insulation Resistance | 100MΩ DC 500V |
Mechanical & operating data
| Motor Model | NFP-GM25-25BY |
|---|---|
| Motor Diameter | 25mm |
| Shaft Length & Diameter | 12mm & ∅4mm |
| Wire Gauge | PHR-4, 2.0mm wire to board connector |
| Wire Length | 150mm |
| Insulation Class | Class E for coils |
| Insulation Strength | 100V AC for one second |
| Operating Temperature | -10°C ~ +55°C |
| Weight | 75g |
02 / TECHNICAL REFERENCE
25mm Stepper Motor Different Gear Ratio Parameters
The full metal gears ensure durability and wear resistance,
extending the motor’s lifespan and providing reliable
performance.
Engineered for low noise operation, this stepper motor is
perfect for applications where quiet performance is essential.
25mm Stepper Motor Different Gear Ratio Parameters
| Gearbox Ratio | Step Angle | No Load Speed 700PPS | Holding Torque | Pull-out Torque |
|---|---|---|---|---|
| 4.4:1 | 3.4° | 397.7rpm | ≥0.3kg.cm | ≥0.25kg.cm |
| 9.3:1 | 1.61° | 188.2rpm | ≥0.6kg.cm | ≥0.5kg.cm |
| 15:1 | 1.0° | 116.7rpm | ≥1.0kg.cm | ≥0.8kg.cm |
| 20:1 | 0.75° | 87.5rpm | ≥1.3kg.cm | ≥1.0kg.cm |
| 34:1 | 0.44° | 51.5rpm | ≥2.0kg.cm | ≥1.8kg.cm |
| 44.9:1 | 0.33° | 38.98rpm | ≥3.0kg.cm | ≥2.5kg.cm |
| 57:1 | 0.26° | 30.7rpm | ≥3.5kg.cm | ≥3.0kg.cm |
| 74.8:1 | 0.2° | 23.4rpm | ≥5.0kg.cm | ≥4.0kg.cm |
| 98.8:1 | 0.15° | 17.7rpm | ≥6.5kg.cm | ≥5.5kg.cm |
| 125:1 | 0.12° | 14rpm | ≥8.0kg.cm | ≥7.0kg.cm |
| 165:1 | 0.09° | 10.6rpm | ≤9.0kg.cm | ≤9.0kg.cm |
| 217:1 | 0.069° | 8.1rpm | ≤9.0kg.cm | ≤9.0kg.cm |
| 362:1 | 0.041° | 4.8rpm | ≤9.0kg.cm | ≤9.0kg.cm |
| 478:1 | 0.031° | 3.7rpm | ≤9.0kg.cm | ≤9.0kg.cm |
03 / TECHNICAL REFERENCE
Brushless Stepper Motor Mechanical Drawing
Equipped with pure copper wire winding, this motor offers strong
electrical conductivity and increased power efficiency.
The motor supports reversible rotation, allowing for flexible
application in various projects.
25mm stepper gear motor outline drawing phase introduction
Open full size ↗
The integrated PCB provides added protection and stability to the motor connections, ensuring long-term reliability.
Brushless Stepper Motor Mechanical Drawing
| Reduction Ratio | Transmission Stages | Gearbox Length (L) |
|---|---|---|
| 4.4:1 | 2-stage transmission | 19mm |
| 9.3:1 | 3-stage transmission | 19mm |
| 15.46:1 | 4-stage transmission | 19mm |
| 20.41:1 | 4-stage transmission | 21mm |
| 34.01:1 | 5-stage transmission | 21mm |
| 44.9:1 | 5-stage transmission | 21mm |
| 74.83:1 | 6-stage transmission | 23mm |
| 98.78:1 | 6-stage transmission | 25mm |
| 164.63:1 | 7-stage transmission | 25mm |
| 217.31:1 | 7-stage transmission | 27mm |
| 362.18:1 | 8-stage transmission | 27mm |
| 478.08:1 | 8-stage transmission | 27mm |
04 / TECHNICAL REFERENCE
BLDC Stepper Motor Wire Turns Introduction
–
3D Printers
: Ideal for precise control of the printing
head and bed movement.
–
CNC Machines
: Suitable for accurate positioning in
computer numerical control machinery.
–
Robotics
: Perfect for driving wheels, actuating arms,
and providing precise control in robotic systems.
–
Automation Systems
: Used in automated devices that
require accurate and repeatable motion.
–
Medical Devices
: Applicable in medical equipment that
demands precise and reliable motion control.
–
Smart Home Devices
: Suitable for smart applications
like automated curtains, door locks, and other home automation
systems.
ENGINEERING ENQUIRY
Discuss NFP-GM25-25BY.
Send the model reference, available space, electrical requirements, operating conditions and expected quantity.