info@nfpmotor.com
Need For Power Electronics Co., Limited · +852 5142 2310
KH SERIES / DC GEAR MOTOR Illustrative render
Illustrative product rendering based on the GB10-4-DZ24003-1-KM assembly drawing
10 mm body / gearbox Source page 17 / 41

GB10-4-DZ24003-1-KM

10 mm Metal Planetary Gear Motor, 1015 Coreless Series

Compact motion. Precisely geared.

10 mm metal planetary gearbox with a 1015 coreless DC motor, offered in 14 reduction ratios. Rated motor voltage is 3.0 V DC.

Gearhead diameter
10 mm
Rated voltage
3.0 V DC
Reduction ratios
4:1–809:1
Gearbox
Metal

Part / series no. GB10-4-DZ24003-1-KM

01 / TECHNICAL DATA

Specifications at a glance.

4:1–809:1

Electrical performance, construction and operating data for the specified configuration or motor family.

Electrical & drive

Electrical & drive
Rated voltage 3.0 V DC
Lead specification 3302, 28 AWG
Lead polarity Blue (-); red (+)

Mechanical & operating data

Mechanical & operating data
Gearbox material Metal
Noise ≤47 dB
Maximum allowable torque 1 kg·cm
Instantaneous allowable torque 2 kg·cm
Output-shaft radial load ≤2 N
Backlash ≤3°
Output-shaft diameter 2.0 +0/-0.01 mm
Output-shaft extension 7.0 ±0.2 mm
Output-shaft flat length 4.0 ±0.05 mm
Output-shaft flat dimension 1.5 +0/-0.05 mm
Lead length 100 ±5 mm
Technical notes
  • Unspecified linear tolerances (GB/T 1804): under 3 mm ±0.05 mm; 3–6 mm ±0.05 mm; 6–20 mm ±0.1 mm; above 20 mm ±0.15 mm.
  • The source noise-test notes disagree: Chinese specifies a 20 cm probe distance; English specifies 10 cm. Ambient noise: 31 dB.

02 / MECHANICAL REFERENCE

Dimensions & assembly layout.

English drawing labels with original dimensions and tolerances. Open the image to inspect the full drawing.

Outline drawing Unit: mm
GB10-4-DZ24003-1-KM outline dimensions and assembly geometry
Outline drawing · Dimensions and tolerances retained from source drawing.

03 / SELECTION DATA

Performance configurations.

14 configurations

Select the complete motor code together with the required voltage, speed and torque. Values and units follow the original specification.

Performance configurations
Model Reduction ratio (:1) Rated voltage (V DC) No-load speed (rpm) No-load current (mA) Rated speed (rpm) Rated current (mA) Rated torque (g·cm) Stall current (mA) Stall torque (g·cm) Gearbox length L (mm) Overall length L1 (mm)
GB10-4-DZ24003-1-KM 4 3.0 3000 60 2100 220 15 655 45 9.7 24.8
GB10-6-DZ24003-1-KM 6 3.0 2050 60 1400 220 22 655 70 9.7 24.8
GB10-13-DZ24003-1-KM 13 3.0 840 60 580 220 45 655 150 12.8 27.9
GB10-19-DZ24003-1-KM 19 3.0 570 60 395 220 70 655 220 12.8 27.9
GB10-28-DZ24003-1-KM 28 3.0 385 60 265 220 100 655 300 12.8 27.9
GB10-46-DZ24003-1-KM 46 3.0 235 60 160 220 145 655 450 15.9 31.0
GB10-69-DZ24003-1-KM 69 3.0 155 60 109 220 220 655 700 15.9 31.0
GB10-102-DZ24003-1-KM 102 3.0 105 60 74 220 325 655 1000 15.9 31.0
GB10-151-DZ24003-1-KM 151 3.0 70 60 50 220 480 655 1500 15.9 31.0
GB10-168-DZ24003-1-KM 168 3.0 65 60 45 220 470 655 1500 19 34.1
GB10-249-DZ24003-1-KM 249 3.0 44 60 30 220 700 655 2200 19 34.1
GB10-368-DZ24003-1-KM 368 3.0 29 60 20 220 1000 655 3300 19 34.1
GB10-546-DZ24003-1-KM 546 3.0 20 60 14 220 1500 655 4800 19 34.1
GB10-809-DZ24003-1-KM 809 3.0 13 60 9 220 2200 655 7200 19 34.1

04 / DESIGN INTEGRATION

From drawing to your mechanism.

01 / FIT

Confirm the envelope.

Review the gearbox dimensions, mounting interface, shaft geometry and connection clearance in the outline drawing.

Review dimensions ↑
02 / SELECT

Match the operating point.

Specify the supply voltage, speed, torque and duty cycle. Use the complete part code when selecting a configuration.

Review original data ↗
03 / VALIDATE

Evaluate in your assembly.

Check start-up behavior, load, clearances and operating temperature in the intended mechanism.

Discuss your application ↗

ENGINEERING ENQUIRY

Discuss this drive for your design.

Send your operating requirements and expected quantity. Reference GB10-4-DZ24003-1-KM.

Contact NFP Motor ↗
Technical source FORWA / KH catalogue · Page 17 · GB10-4-DZ24003-1-KM Download source PDF ↓

Product image: AI-generated illustrative render based on the assembly drawing. Exact dimensions and variant details follow the technical drawing and specification tables.