info@nfpmotor.com
Need For Power Electronics Co., Limited · +852 5142 2310
KH SERIES / DC GEAR MOTOR Illustrative render
Illustrative product rendering based on the GB12-4-MD18003-1-M assembly drawing
12 mm body / gearbox Source page 20 / 41

GB12-4-MD18003-1-M

12 mm Planetary DC Gear Motor, MD18003 Series

Compact motion. Precisely geared.

12 mm planetary gearbox with a brushed DC motor, offered in 14 reduction ratios at 3.0 V DC.

Gearhead diameter
12 mm
Rated voltage
3.0 V DC
Reduction ratios
4:1–1296:1
Ratio options
14

Part / series no. GB12-4-MD18003-1-M

01 / TECHNICAL DATA

Specifications at a glance.

4:1–1296:1

Electrical performance, construction and operating data for the specified configuration or motor family.

Electrical & drive

Electrical & drive
Rated voltage 3.0 V DC

Mechanical & operating data

Mechanical & operating data
Noise ≤47 dB
Output-shaft diameter 3.0 mm
Output-shaft flat dimension 2.0 mm
Output-shaft extension 7.2 mm
Output-shaft flat length 3.7 mm
Pilot diameter 5.0 mm
Pilot projection 1.6 mm
Technical notes
  • Unspecified linear tolerances (GB/T 1804): under 3 mm ±0.05 mm; 3–6 mm ±0.05 mm; 6–20 mm ±0.1 mm; above 20 mm ±0.15 mm.
  • The source noise-test notes disagree: Chinese specifies a 20 cm probe distance; English specifies 10 cm. Ambient noise: 31 dB.

02 / MECHANICAL REFERENCE

Dimensions & assembly layout.

English drawing labels with original dimensions and tolerances. Open the image to inspect the full drawing.

Outline drawing Unit: mm
GB12-4-MD18003-1-M outline dimensions and assembly geometry
Outline drawing · Dimensions and tolerances retained from source drawing.

03 / SELECTION DATA

Performance configurations.

14 configurations

Select the complete motor code together with the required voltage, speed and torque. Values and units follow the original specification.

Performance configurations
Model Reduction ratio (:1) Rated voltage (V DC) No-load speed (rpm) No-load current (mA) Rated speed (rpm) Rated current (mA) Rated torque (g·cm) Gearbox length L (mm) Overall length L1 (mm)
GB12-4-MD18003-1-M 4 3.0 3300 60 2700 150 7 6.8 22.0
GB12-6-MD18003-1-M 6 3.0 2200 60 1800 150 10 6.8 22.0
GB12-16-MD18003-1-M 16 3.0 830 60 680 150 24 10.6 25.8
GB12-24-MD18003-1-M 24 3.0 550 60 450 150 35 10.6 25.8
GB12-36-MD18003-1-M 36 3.0 360 60 300 150 50 10.6 25.8
GB12-64-MD18003-1-M 64 3.0 200 70 170 160 85 14.4 29.6
GB12-96-MD18003-1-M 96 3.0 135 70 110 160 125 14.4 29.6
GB12-144-MD18003-1-M 144 3.0 85 70 75 160 190 14.4 29.6
GB12-216-MD18003-1-M 216 3.0 58 70 45 160 285 14.4 29.6
GB12-256-MD18003-1-M 256 3.0 50 80 40 170 300 18.2 33.4
GB12-384-MD18003-1-M 384 3.0 32 80 25 170 450 18.2 33.4
GB12-576-MD18003-1-M 576 3.0 22 80 18 170 670 18.2 33.4
GB12-864-MD18003-1-M 864 3.0 15 80 12 170 1000 18.2 33.4
GB12-1296-MD18003-1-M 1296 3.0 10 80 8 170 1500 18.2 33.4

04 / DESIGN INTEGRATION

From drawing to your mechanism.

01 / FIT

Confirm the envelope.

Review the gearbox dimensions, mounting interface, shaft geometry and connection clearance in the outline drawing.

Review dimensions ↑
02 / SELECT

Match the operating point.

Specify the supply voltage, speed, torque and duty cycle. Use the complete part code when selecting a configuration.

Review original data ↗
03 / VALIDATE

Evaluate in your assembly.

Check start-up behavior, load, clearances and operating temperature in the intended mechanism.

Discuss your application ↗

ENGINEERING ENQUIRY

Discuss this drive for your design.

Send your operating requirements and expected quantity. Reference GB12-4-MD18003-1-M.

Contact NFP Motor ↗
Technical source FORWA / KH catalogue · Page 20 · GB12-4-MD18003-1-M Download source PDF ↓

Product image: AI-generated illustrative render based on the assembly drawing. Exact dimensions and variant details follow the technical drawing and specification tables.