info@nfpmotor.com
Need For Power Electronics Co., Limited · +852 5142 2310
KH SERIES / DC GEAR MOTOR Illustrative render
Illustrative product rendering based on the GB12-4-MD23011-1-M assembly drawing
12 mm body / gearbox Source page 21 / 41

GB12-4-MD23011-1-M

12 mm Metal Planetary Gear Motor, N20 Series

Compact motion. Precisely geared.

12 mm metal planetary gearbox with an N20 brushed DC motor, offered in 14 reduction ratios. Rated motor voltage is 3.0 V DC.

Gearhead diameter
12 mm
Rated voltage
3.0 V DC
Reduction ratios
4:1–1296:1
Gearbox
Metal

Part / series no. GB12-4-MD23011-1-M

01 / TECHNICAL DATA

Specifications at a glance.

4:1–1296:1

Electrical performance, construction and operating data for the specified configuration or motor family.

Electrical & drive

Electrical & drive
Rated voltage 3.0 V DC

Mechanical & operating data

Mechanical & operating data
Gearbox material Metal
Noise ≤47 dB
Maximum allowable torque 2 kg·cm
Instantaneous allowable torque 5 kg·cm
Output-shaft radial load ≤10 N
Backlash ≤3°
Gearhead diameter tolerance 12.0 +0.05/-0.15 mm
Output-shaft diameter 3.0 +0/-0.03 mm
Output-shaft flat dimension 2.5 +0/-0.05 mm
Output-shaft extension 13.5 ±0.2 mm
Output-shaft flat length 7.0 ±0.05 mm
Pilot diameter 5.0 ±0.05 mm
Mounting holes 2 × M2×0.4, depth 2.0 mm
Mounting-hole spacing 9.5 mm
Gearbox length tolerance L ±0.2 mm
Overall length tolerance L1 ±0.5 mm
Technical notes
  • Unspecified linear tolerances (GB/T 1804): under 3 mm ±0.05 mm; 3–6 mm ±0.05 mm; 6–20 mm ±0.1 mm; above 20 mm ±0.15 mm.
  • The source noise-test notes disagree: Chinese specifies a 20 cm probe distance; English specifies 10 cm. Ambient noise: 31 dB.

02 / MECHANICAL REFERENCE

Dimensions & assembly layout.

English drawing labels with original dimensions and tolerances. Open the image to inspect the full drawing.

Outline drawing Unit: mm
GB12-4-MD23011-1-M outline dimensions and assembly geometry
Outline drawing · Dimensions and tolerances retained from source drawing.

03 / SELECTION DATA

Performance configurations.

14 configurations

Select the complete motor code together with the required voltage, speed and torque. Values and units follow the original specification.

Performance configurations
Model Reduction ratio (:1) Rated voltage (V DC) No-load speed (rpm) No-load current (mA) Rated speed (rpm) Rated current (mA) Rated torque (g·cm) Stall current (mA) Stall torque (g·cm) Gearbox length L (mm) Overall length L1 (mm)
GB12-4-MD23011-1-M 4 3.0 3300 60 2600 180 8.5 650 40 12.4 27.6
GB12-6-MD23011-1-M 6 3.0 2200 60 1750 180 12 650 60 12.4 27.6
GB12-16-MD23011-1-M 16 3.0 830 60 650 180 28 650 130 16.2 31.4
GB12-24-MD23011-1-M 24 3.0 550 60 430 180 43 650 200 16.2 31.4
GB12-36-MD23011-1-M 36 3.0 360 60 290 180 65 650 300 16.2 31.4
GB12-64-MD23011-1-M 64 3.0 200 70 164 180 100 650 480 20 35.2
GB12-96-MD23011-1-M 96 3.0 135 70 110 180 150 650 720 20 35.2
GB12-144-MD23011-1-M 144 3.0 85 70 72 180 225 650 1000 20 35.2
GB12-216-MD23011-1-M 216 3.0 58 70 48 180 340 650 1600 20 35.2
GB12-256-MD23011-1-M 256 3.0 50 80 41 180 355 650 1700 23.8 39
GB12-384-MD23011-1-M 384 3.0 32 80 27 180 530 650 2500 23.8 39
GB12-576-MD23011-1-M 576 3.0 22 80 18 180 800 650 3800 23.8 39
GB12-864-MD23011-1-M 864 3.0 15 80 12 180 1200 650 5800 23.8 39
GB12-1296-MD23011-1-M 1296 3.0 10 80 8 180 1800 650 8600 23.8 39

04 / DESIGN INTEGRATION

From drawing to your mechanism.

01 / FIT

Confirm the envelope.

Review the gearbox dimensions, mounting interface, shaft geometry and connection clearance in the outline drawing.

Review dimensions ↑
02 / SELECT

Match the operating point.

Specify the supply voltage, speed, torque and duty cycle. Use the complete part code when selecting a configuration.

Review original data ↗
03 / VALIDATE

Evaluate in your assembly.

Check start-up behavior, load, clearances and operating temperature in the intended mechanism.

Discuss your application ↗

ENGINEERING ENQUIRY

Discuss this drive for your design.

Send your operating requirements and expected quantity. Reference GB12-4-MD23011-1-M.

Contact NFP Motor ↗
Technical source FORWA / KH catalogue · Page 21 · GB12-4-MD23011-1-M Download source PDF ↓

Product image: AI-generated illustrative render based on the assembly drawing. Exact dimensions and variant details follow the technical drawing and specification tables.