info@nfpmotor.com
Need For Power Electronics Co., Limited · +852 5142 2310
KH SERIES / DC GEAR MOTOR Illustrative render
Illustrative product rendering based on the GB16-16-MD18005-1-M assembly drawing
16 mm body / gearbox Source page 26 / 41

GB16-16-MD18005-1-M

16 mm Metal Planetary DC Gear Motor

Compact motion. Precisely geared.

16 mm metal planetary gearbox with a brushed DC motor, offered in 12 reduction ratios. Rated motor voltage is 5.0 V DC.

Gearhead diameter
16 mm
Rated voltage
5.0 V DC
Reduction ratios
16:1–1296:1
Gearbox
Metal

Part / series no. GB16-16-MD18005-1-M

01 / TECHNICAL DATA

Specifications at a glance.

16:1–1296:1

Electrical performance, construction and operating data for the specified configuration or motor family.

Electrical & drive

Electrical & drive
Rated voltage 5.0 V DC

Mechanical & operating data

Mechanical & operating data
Gearbox material Metal
Noise ≤47 dB
Maximum allowable torque 5 kg·cm
Instantaneous allowable torque 10 kg·cm
Output-shaft radial load ≤20 N
Backlash ≤3°
Gearhead diameter tolerance 16.0 +0/-0.2 mm
Output-shaft diameter 3.0 +0/-0.05 mm
Output-shaft flat dimension 2.6 +0/-0.1 mm
Output-shaft extension 12.4 ±0.3 mm
Output-shaft flat length 7.8 ±0.1 mm
Pilot diameter 8.0 +0/-0.1 mm
Mounting holes 4 × M2
Mounting-hole pitch-circle diameter 11.0 mm
Pilot projection 2.7 mm
Technical notes
  • Unspecified linear tolerances (GB/T 1804): under 3 mm ±0.05 mm; 3–6 mm ±0.05 mm; 6–20 mm ±0.1 mm; above 20 mm ±0.15 mm.
  • Noise measured 20 cm from the gearbox with 31 dB ambient noise.

02 / MECHANICAL REFERENCE

Dimensions & assembly layout.

English drawing labels with original dimensions and tolerances. Open the image to inspect the full drawing.

Outline drawing Unit: mm
GB16-16-MD18005-1-M outline dimensions and assembly geometry
Outline drawing · Dimensions and tolerances retained from source drawing.

03 / SELECTION DATA

Performance configurations.

12 configurations

Select the complete motor code together with the required voltage, speed and torque. Values and units follow the original specification.

Performance configurations
Model Reduction ratio (:1) Rated voltage (V DC) No-load speed (rpm) No-load current (mA) Rated speed (rpm) Rated current (mA) Rated torque (g·cm) Stall current (mA) Stall torque (kg·cm) Gearbox length L (mm) Overall length L1 (mm)
GB16-16-MD18005-1-M 16 5.0 375 50 280 180 170 800 0.45 14.8 41.8
GB16-24-MD18005-1-M 24 5.0 250 50 185 180 260 800 0.65 14.8 41.8
GB16-36-MD18005-1-M 36 5.0 165 50 125 180 390 800 1 14.8 41.8
GB16-64-MD18005-1-M 64 5.0 93 55 70 190 610 800 1.6 18.1 45.1
GB16-96-MD18005-1-M 96 5.0 62 55 46 190 910 800 2.4 18.1 45.1
GB16-144-MD18005-1-M 144 5.0 40 55 31 190 1300 800 3.5 18.1 45.1
GB16-216-MD18005-1-M 216 5.0 27 55 20 190 2000 800 5.2 18.1 45.1
GB16-256-MD18005-1-M 256 5.0 23 60 17 200 2100 800 5.5 21.4 48.4
GB16-384-MD18005-1-M 384 5.0 15 60 11 200 3200 800 8.5 21.4 48.4
GB16-576-MD18005-1-M 576 5.0 10 60 7.5 200 4800 800 12 21.4 48.4
GB16-864-MD18005-1-M 864 5.0 7.0 60 5.2 200 7200 800 19 21.4 48.4
GB16-1296-MD18005-1-M 1296 5.0 4.5 60 3.5 200 10000 800 28 21.4 48.4

04 / DESIGN INTEGRATION

From drawing to your mechanism.

01 / FIT

Confirm the envelope.

Review the gearbox dimensions, mounting interface, shaft geometry and connection clearance in the outline drawing.

Review dimensions ↑
02 / SELECT

Match the operating point.

Specify the supply voltage, speed, torque and duty cycle. Use the complete part code when selecting a configuration.

Review original data ↗
03 / VALIDATE

Evaluate in your assembly.

Check start-up behavior, load, clearances and operating temperature in the intended mechanism.

Discuss your application ↗

ENGINEERING ENQUIRY

Discuss this drive for your design.

Send your operating requirements and expected quantity. Reference GB16-16-MD18005-1-M.

Contact NFP Motor ↗
Technical source FORWA / KH catalogue · Page 26 · GB16-16-MD18005-1-M Download source PDF ↓

Product image: AI-generated illustrative render based on the assembly drawing. Exact dimensions and variant details follow the technical drawing and specification tables.