info@nfpmotor.com
Need For Power Electronics Co., Limited · +852 5142 2310
KH SERIES / DC GEAR MOTOR Illustrative render
Illustrative product rendering based on the GB20-4-MD19002-2-M assembly drawing
20 mm body / gearbox Source page 27 / 41

GB20-4-MD19002-2-M

20 mm Plastic Planetary DC Gear Motor

Compact motion. Precisely geared.

20 mm plastic planetary gearbox with a cylindrical brushed DC motor, offered in 14 reduction ratios. Rated motor voltage is 12.0 V DC.

Gearhead diameter
20 mm
Rated voltage
12.0 V DC
Reduction ratios
4:1–1296:1
Gearbox
Plastic

Part / series no. GB20-4-MD19002-2-M

01 / TECHNICAL DATA

Specifications at a glance.

4:1–1296:1

Electrical performance, construction and operating data for the specified configuration or motor family.

Electrical & drive

Electrical & drive
Rated voltage 12.0 V DC

Mechanical & operating data

Mechanical & operating data
Gearbox material Plastic
Noise ≤55 dB
Maximum allowable torque 6 kg·cm
Instantaneous allowable torque 15 kg·cm
Output-shaft radial load ≤30 N
Backlash ≤3°
Gearhead diameter tolerance 20.0 +0/-0.2 mm
Motor diameter 20.3 mm
Motor length 25.0 mm
Output-shaft diameter 4.0 +0/-0.05 mm
Output-shaft flat dimension 3.0 +0/-0.1 mm
Output-shaft extension 18.9 ±0.3 mm
Output-shaft flat length 14.0 ±0.1 mm
Pilot diameter 9.0 +0/-0.1 mm
Pilot projection 2.2 mm
Mounting holes 3 × M2.5
Mounting-hole pitch-circle diameter 14.0 mm
Technical notes
  • Unspecified linear tolerances (GB/T 1804): under 3 mm ±0.05 mm; 3–6 mm ±0.05 mm; 6–20 mm ±0.1 mm; above 20 mm ±0.15 mm.
  • Noise measured 20 cm from the gearbox with 31 dB ambient noise.

02 / MECHANICAL REFERENCE

Dimensions & assembly layout.

English drawing labels with original dimensions and tolerances. Open the image to inspect the full drawing.

Outline drawing Unit: mm
GB20-4-MD19002-2-M outline dimensions and assembly geometry
Outline drawing · Dimensions and tolerances retained from source drawing.

03 / SELECTION DATA

Performance configurations.

14 configurations

Select the complete motor code together with the required voltage, speed and torque. Values and units follow the original specification.

Performance configurations
Model Reduction ratio (:1) Rated voltage (V DC) No-load speed (rpm) No-load current (mA) Rated speed (rpm) Rated current (mA) Rated torque (g·cm) Gearbox length L (mm) Overall length L1 (mm)
GB20-4-MD19002-2-M 4 12.0 1800 50 1500 110 30 17.6 42.6
GB20-6-MD19002-2-M 6 12.0 1200 50 1000 110 50 17.6 42.6
GB20-16-MD19002-2-M 16 12.0 450 50 380 115 110 22.9 47.9
GB20-24-MD19002-2-M 24 12.0 300 50 255 115 170 22.9 47.9
GB20-36-MD19002-2-M 36 12.0 200 50 170 115 260 22.9 47.9
GB20-64-MD19002-2-M 64 12.0 110 60 95 120 400 28.2 53.2
GB20-96-MD19002-2-M 96 12.0 75 60 60 120 600 28.2 53.2
GB20-144-MD19002-2-M 144 12.0 50 60 40 120 900 28.2 53.2
GB20-216-MD19002-2-M 216 12.0 33 60 27 120 1300 28.2 53.2
GB20-256-MD19002-2-M 256 12.0 28 60 23 130 1400 33.5 58.5
GB20-384-MD19002-2-M 384 12.0 18 60 16 130 2100 33.5 58.5
GB20-576-MD19002-2-M 576 12.0 12 60 10 130 3200 33.5 58.5
GB20-864-MD19002-2-M 864 12.0 8.5 60 7 130 4800 33.5 58.5
GB20-1296-MD19002-2-M 1296 12.0 5.7 60 4.5 130 7200 33.5 58.5

04 / DESIGN INTEGRATION

From drawing to your mechanism.

01 / FIT

Confirm the envelope.

Review the gearbox dimensions, mounting interface, shaft geometry and connection clearance in the outline drawing.

Review dimensions ↑
02 / SELECT

Match the operating point.

Specify the supply voltage, speed, torque and duty cycle. Use the complete part code when selecting a configuration.

Review original data ↗
03 / VALIDATE

Evaluate in your assembly.

Check start-up behavior, load, clearances and operating temperature in the intended mechanism.

Discuss your application ↗

ENGINEERING ENQUIRY

Discuss this drive for your design.

Send your operating requirements and expected quantity. Reference GB20-4-MD19002-2-M.

Contact NFP Motor ↗
Technical source FORWA / KH catalogue · Page 27 · GB20-4-MD19002-2-M Download source PDF ↓

Product image: AI-generated illustrative render based on the assembly drawing. Exact dimensions and variant details follow the technical drawing and specification tables.