info@nfpmotor.com
Need For Power Electronics Co., Limited · +852 5142 2310
KH SERIES / DC GEAR MOTOR Illustrative render
Illustrative product rendering based on the GB12-4-MD23011-1-KM assembly drawing
12 mm body / gearbox Source page 22 / 41

GB12-4-MD23011-1-KM

12 mm Metal Planetary Gear Motor, 1220 Coreless Series

Compact motion. Precisely geared.

12 mm metal planetary gearbox with a 1220 coreless DC motor, offered in 14 reduction ratios. Rated motor voltage is 3.0 V DC.

Gearhead diameter
12 mm
Rated voltage
3.0 V DC
Reduction ratios
4:1–1296:1
Gearbox
Metal

Part / series no. GB12-4-MD23011-1-KM

01 / TECHNICAL DATA

Specifications at a glance.

4:1–1296:1

Electrical performance, construction and operating data for the specified configuration or motor family.

Electrical & drive

Electrical & drive
Rated voltage 3.0 V DC

Mechanical & operating data

Mechanical & operating data
Gearbox material Metal
Noise ≤47 dB
Maximum allowable torque 2 kg·cm
Instantaneous allowable torque 5 kg·cm
Output-shaft radial load ≤10 N
Backlash ≤3°
Gearhead diameter tolerance 12.0 +0.05/-0.15 mm
Output-shaft diameter 3.0 +0/-0.03 mm
Output-shaft flat dimension 2.5 +0/-0.05 mm
Output-shaft extension 13.5 ±0.2 mm
Output-shaft flat length 7.0 ±0.05 mm
Pilot diameter 5.0 ±0.05 mm
Mounting holes 2 × M2×0.4, depth 2.0 mm
Mounting-hole spacing 9.5 mm
Gearbox length tolerance L ±0.2 mm
Overall length tolerance L1 ±0.5 mm
Terminal thickness 0.3 mm
Terminal projection 2.2 mm
Terminal spacing 5.80 mm
Technical notes
  • Unspecified linear tolerances (GB/T 1804): under 3 mm ±0.05 mm; 3–6 mm ±0.05 mm; 6–20 mm ±0.1 mm; above 20 mm ±0.15 mm.
  • The source noise-test notes disagree: Chinese specifies a 20 cm probe distance; English specifies 10 cm. Ambient noise: 31 dB.

02 / MECHANICAL REFERENCE

Dimensions & assembly layout.

English drawing labels with original dimensions and tolerances. Open the image to inspect the full drawing.

Outline drawing Unit: mm
GB12-4-MD23011-1-KM outline dimensions and assembly geometry
Outline drawing · Dimensions and tolerances retained from source drawing.

03 / SELECTION DATA

Performance configurations.

14 configurations

Select the complete motor code together with the required voltage, speed and torque. Values and units follow the original specification.

Performance configurations
Model Reduction ratio (:1) Rated voltage (V DC) No-load speed (rpm) No-load current (mA) Rated speed (rpm) Rated current (mA) Rated torque (g·cm) Stall current (A) Stall torque (kg·cm) Gearbox length L (mm) Overall length L1 (mm)
GB12-4-MD23011-1-KM 4 3.0 3300 60 2400 750 50 3 0.2 12.4 33.2
GB12-6-MD23011-1-KM 6 3.0 2200 60 1600 750 75 3 0.3 12.4 33.2
GB12-16-MD23011-1-KM 16 3.0 830 60 610 750 170 3 0.6 16.2 37
GB12-24-MD23011-1-KM 24 3.0 550 60 400 750 260 3 1 16.2 37
GB12-36-MD23011-1-KM 36 3.0 360 60 270 750 390 3 1.5 16.2 37
GB12-64-MD23011-1-KM 64 3.0 200 70 150 750 610 3 2.4 20 40.8
GB12-96-MD23011-1-KM 96 3.0 135 70 100 750 910 3 3.6 20 40.8
GB12-144-MD23011-1-KM 144 3.0 85 70 68 750 1300 3 5.4 20 40.8
GB12-216-MD23011-1-KM 216 3.0 58 70 45 750 2000 3 8.2 20 40.8
GB12-256-MD23011-1-KM 256 3.0 50 80 38 750 2100 3 8.5 23.8 44.6
GB12-384-MD23011-1-KM 384 3.0 32 80 25 750 3200 3 12.5 23.8 44.6
GB12-576-MD23011-1-KM 576 3.0 22 80 17 750 4800 3 19 23.8 44.6
GB12-864-MD23011-1-KM 864 3.0 15 80 11 750 7200 3 29 23.8 44.6
GB12-1296-MD23011-1-KM 1296 3.0 10 80 7.5 750 10000 3 43 23.8 44.6

04 / DESIGN INTEGRATION

From drawing to your mechanism.

01 / FIT

Confirm the envelope.

Review the gearbox dimensions, mounting interface, shaft geometry and connection clearance in the outline drawing.

Review dimensions ↑
02 / SELECT

Match the operating point.

Specify the supply voltage, speed, torque and duty cycle. Use the complete part code when selecting a configuration.

Review original data ↗
03 / VALIDATE

Evaluate in your assembly.

Check start-up behavior, load, clearances and operating temperature in the intended mechanism.

Discuss your application ↗

ENGINEERING ENQUIRY

Discuss this drive for your design.

Send your operating requirements and expected quantity. Reference GB12-4-MD23011-1-KM.

Contact NFP Motor ↗
Technical source FORWA / KH catalogue · Page 22 · GB12-4-MD23011-1-KM Download source PDF ↓

Product image: AI-generated illustrative render based on the assembly drawing. Exact dimensions and variant details follow the technical drawing and specification tables.