info@nfpmotor.com
Need For Power Electronics Co., Limited · +852 5142 2310
KH SERIES / DC GEAR MOTOR Illustrative render
Illustrative product rendering based on the GB14x26-250-MD18004-1-M assembly drawing
14 × 26 mm body / gearbox Source page 23 / 41

GB14x26-250-MD18004-1-M

14 × 26 mm 250:1 Square DC Gear Motor

Compact motion. Precisely geared.

14 × 26 mm gearbox with 250:1 reduction ratio, rated at 3.0 V DC and 380 g·cm output torque.

Rated voltage
3.0 V DC
Reduction ratio
250:1
Rated torque
380 g·cm
Rated speed
44 ±10% rpm

Part / series no. GB14x26-250-MD18004-1-M

01 / TECHNICAL DATA

Specifications at a glance.

250:1

Electrical performance, construction and operating data for the specified configuration or motor family.

Electrical & drive

Electrical & drive
Rated voltage 3.0 V DC
No-load current ≤80 mA
Rated current 150 mA
Stall current 650 mA

Mechanical & operating data

Mechanical & operating data
Operating temperature -20 to +50 °C
No-load speed 54 ±10% rpm
Rated torque 380 g·cm
Rated speed 44 ±10% rpm
Stall torque 1300 g·cm
Direction CW/CCW
Noise ≤55 dB
Axial gap 0.2 mm max.
Gearbox body width 13.8 mm
Gearbox body height 26.0 mm
Width across mounting ears 21.8 mm
Mounting-hole spacing 18.0 mm
Mounting holes 2 × Ø1.6 mm
Output-shaft diameter 4.5 mm
Output-shaft flat dimension 3.6 mm
Shaft cross-hole diameter 1.5 mm
Output projection from gearhead 9.5 mm
Cross-hole center to gearhead 6.5 mm
Gearbox depth 13.0 mm
Shaft-center offset from bottom 12.2 mm
Technical notes
  • Unspecified linear tolerances (GB/T 1804): under 3 mm ±0.05 mm; 3–6 mm ±0.05 mm; 6–20 mm ±0.1 mm; above 20 mm ±0.15 mm.
  • Noise measured 20 cm from the gearbox with 31 dB ambient noise.

02 / MECHANICAL REFERENCE

Dimensions & assembly layout.

English drawing labels with original dimensions and tolerances. Open the image to inspect the full drawing.

Outline drawing Unit: mm
GB14x26-250-MD18004-1-M outline dimensions and assembly geometry
Outline drawing · Dimensions and tolerances retained from source drawing.

04 / DESIGN INTEGRATION

From drawing to your mechanism.

01 / FIT

Confirm the envelope.

Review the gearbox dimensions, mounting interface, shaft geometry and connection clearance in the outline drawing.

Review dimensions ↑
02 / SELECT

Match the operating point.

Specify the supply voltage, speed, torque and duty cycle. Use the complete part code when selecting a configuration.

Review original data ↗
03 / VALIDATE

Evaluate in your assembly.

Check start-up behavior, load, clearances and operating temperature in the intended mechanism.

Discuss your application ↗

ENGINEERING ENQUIRY

Discuss this drive for your design.

Send your operating requirements and expected quantity. Reference GB14x26-250-MD18004-1-M.

Contact NFP Motor ↗
Technical source FORWA / KH catalogue · Page 23 · GB14x26-250-MD18004-1-M Download source PDF ↓

Product image: AI-generated illustrative render based on the assembly drawing. Exact dimensions and variant details follow the technical drawing and specification tables.