info@nfpmotor.com
Need For Power Electronics Co., Limited · +852 5142 2310
KH SERIES / DC GEAR MOTOR Illustrative render
Illustrative product rendering based on the GB20-4-MD19002-1-M assembly drawing
20 mm body / gearbox Source page 28 / 41

GB20-4-MD19002-1-M

20 mm Metal Planetary DC Gear Motor

Compact motion. Precisely geared.

20 mm metal planetary gearbox with a cylindrical brushed DC motor, offered in 14 reduction ratios. Rated motor voltage is 12.0 V DC.

Gearhead diameter
20 mm
Rated voltage
12.0 V DC
Reduction ratios
4:1–1296:1
Gearbox
Metal

Part / series no. GB20-4-MD19002-1-M

01 / TECHNICAL DATA

Specifications at a glance.

4:1–1296:1

Electrical performance, construction and operating data for the specified configuration or motor family.

Electrical & drive

Electrical & drive
Rated voltage 12.0 V DC

Mechanical & operating data

Mechanical & operating data
Gearbox material Metal
Noise ≤55 dB
Maximum allowable torque 10 kg·cm
Instantaneous allowable torque 25 kg·cm
Output-shaft radial load ≤50 N
Backlash ≤3°
Gearhead diameter tolerance 20.0 +0/-0.2 mm
Motor diameter 20.3 mm
Motor length 25.0 mm
Output-shaft diameter 4.0 +0/-0.05 mm
Output-shaft flat dimension 3.0 +0/-0.1 mm
Output-shaft extension 18.9 ±0.3 mm
Output-shaft flat length 14.0 ±0.1 mm
Pilot diameter 9.0 +0/-0.1 mm
Pilot projection 2.2 mm
Mounting holes 3 × M2.5
Mounting-hole pitch-circle diameter 14.0 mm
Technical notes
  • Unspecified linear tolerances (GB/T 1804): under 3 mm ±0.05 mm; 3–6 mm ±0.05 mm; 6–20 mm ±0.1 mm; above 20 mm ±0.15 mm.
  • Noise measured 20 cm from the gearbox with 31 dB ambient noise.

02 / MECHANICAL REFERENCE

Dimensions & assembly layout.

English drawing labels with original dimensions and tolerances. Open the image to inspect the full drawing.

Outline drawing Unit: mm
GB20-4-MD19002-1-M outline dimensions and assembly geometry
Outline drawing · Dimensions and tolerances retained from source drawing.

03 / SELECTION DATA

Performance configurations.

14 configurations

Select the complete motor code together with the required voltage, speed and torque. Values and units follow the original specification.

Performance configurations
Model Reduction ratio (:1) Rated voltage (V DC) No-load speed (rpm) No-load current (mA) Rated speed (rpm) Rated current (mA) Rated torque (g·cm) Stall current (mA) Stall torque (kg·cm) Gearbox length L (mm) Overall length L1 (mm)
GB20-4-MD19002-1-M 4 12.0 1800 50 1500 110 30 550 0.2 17.6 42.6
GB20-6-MD19002-1-M 6 12.0 1200 50 1000 110 50 550 0.3 17.6 42.6
GB20-16-MD19002-1-M 16 12.0 450 50 380 115 110 550 0.65 22.9 47.9
GB20-24-MD19002-1-M 24 12.0 300 50 255 115 170 550 1 22.9 47.9
GB20-36-MD19002-1-M 36 12.0 200 50 170 115 260 550 1.5 22.9 47.9
GB20-64-MD19002-1-M 64 12.0 110 60 95 120 400 550 2.4 28.2 53.2
GB20-96-MD19002-1-M 96 12.0 75 60 60 120 600 550 3.5 28.2 53.2
GB20-144-MD19002-1-M 144 12.0 50 60 40 120 900 550 5.4 28.2 53.2
GB20-216-MD19002-1-M 216 12.0 33 60 27 120 1300 550 8.2 28.2 53.2
GB20-256-MD19002-1-M 256 12.0 28 60 23 130 1400 550 8.5 33.5 58.5
GB20-384-MD19002-1-M 384 12.0 18 60 16 130 2100 550 12.5 33.5 58.5
GB20-576-MD19002-1-M 576 12.0 12 60 10 130 3200 550 19 33.5 58.5
GB20-864-MD19002-1-M 864 12.0 8.5 60 7 130 4800 550 29 33.5 58.5
GB20-1296-MD19002-1-M 1296 12.0 5.7 60 4.5 130 7200 550 42 33.5 58.5

04 / DESIGN INTEGRATION

From drawing to your mechanism.

01 / FIT

Confirm the envelope.

Review the gearbox dimensions, mounting interface, shaft geometry and connection clearance in the outline drawing.

Review dimensions ↑
02 / SELECT

Match the operating point.

Specify the supply voltage, speed, torque and duty cycle. Use the complete part code when selecting a configuration.

Review original data ↗
03 / VALIDATE

Evaluate in your assembly.

Check start-up behavior, load, clearances and operating temperature in the intended mechanism.

Discuss your application ↗

ENGINEERING ENQUIRY

Discuss this drive for your design.

Send your operating requirements and expected quantity. Reference GB20-4-MD19002-1-M.

Contact NFP Motor ↗
Technical source FORWA / KH catalogue · Page 28 · GB20-4-MD19002-1-M Download source PDF ↓

Product image: AI-generated illustrative render based on the assembly drawing. Exact dimensions and variant details follow the technical drawing and specification tables.